Front-Facing Webcamera - HP 10 G2 2301 Maintenance And Service Manual

Table of Contents

Advertisement

Front-facing webcamera

Description
Front-facing webcamera (includes cable)
Before removing the front-facing webcamera, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off, turn the tablet on, and then shut it down
through the operating system.
2.
Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the battery (see
5.
Remove the speaker (see
6.
Remove the rear-facing webcamera (see
7.
Remove the antenna board (see
8.
Remove the touch screen board (see
9.
Remove the power/volume button board (see
10.
Remove the system board (see
Remove the front-facing webcamera:
1.
Release the ZIF connector (1) that secures the front-facing webcamera cable to the system board.
2.
Remove the front-facing webcamera (2) from the display panel assembly.
Reverse this procedure to install the front-facing webcamera.
20
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Battery on page
13).
Speaker on page
14).
Rear-facing webcamera on page
Antenna board on page
Touch screen board and display cable on page
Power/volume button board on page
System board on page
14).
16).
19).
Spare part number
833744-001
17).
18).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents