Related Manuals for AOC G2778VQ
Summary of Contents for AOC G2778VQ
- Page 1 LCD Monitor User Manual G2778VQ LED Backlight www.aoc.com ©2015 AOC.All Rights Reserved.
-
Page 2: Table Of Contents
Safety ................................3 National Conventions ..........................3 Power ................................4 Installation ..............................5 Cleaning ..............................6 Other ................................7 Setup .................................8 Contents in Box ............................8 Setup Stand & Base ............................ 9 Adjusting Viewing Angle ..........................10 Connecting the Monitor ..........................11 System requirement ..........................12 FreeSync function .......................... - Page 3 Warranty Statement for Europe ......................... 54 Warranty Statement for Middle East and Africa (MEA) ................56 AOC PIXEL POLICY ISO 9241-307 CLASS 1 ..................58 Warranty Statement for North & South America (excluding Brazil) ............59 EASE PROGRAME ........................... 61...
-
Page 4: Safety
Safety National Conventions The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and warnings, and they are used as follows: NOTE: A NOTE indicates important information that helps you make better use of your computer system. -
Page 5: Power
Power The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. -
Page 6: Installation
Installation Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product. -
Page 7: Cleaning
Cleaning Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet. When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it will scratch the screen surface. -
Page 8: Other
Other If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a Service Center. Make sure that the ventilating openings are not blocked by a table or curtain. Do not engage the LCD monitor in severe vibration or high impact conditions during operation. Do not knock or drop the monitor during operation or transportation. -
Page 9: Setup
Power Cable Monitor Base Analog Cable Audio Cable HDMI Cable DP Cable Not all signal cables (Analog, Audio, HDMI, DP cables) will be provided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation. -
Page 10: Setup Stand & Base
Setup Stand & Base Please setup or remove the base following the steps as below. Setup: Remove:... -
Page 11: Adjusting Viewing Angle
Adjusting Viewing Angle For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor's angle to your own preference. Hold the stand so you will not topple the monitor when you change the monitor's angle. You are able to adjust the monitor's angle from -4°... -
Page 12: Connecting The Monitor
Connecting the Monitor Cable Connections In Back of Monitor and Computer: 3 4 5 AC port HDMI D-Sub Audio Earphone To protect equipment, always turn off the PC and LCD monitor before connecting. Connect the power cable to the AC port on the back of the monitor. Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the computer's D-Sub port. -
Page 13: System Requirement
Reconnect the cables. Refer to the user's manual that came with the optional wall mounting arm for instructions on attaching it to the wall. Noted : VESA mounting screw holes are not available for all models, please check with the dealer or official department of AOC. -
Page 14: Adjusting
Adjusting Setting Optimal Resolution Windows 8 For Windows 8: Right click and click All apps at the bottom-right of the screen. Set the “View by” to “Category”. Click Appearance and Personalization. -
Page 15: Windows 7
Click DISPLAY. Set the resolution SLIDE-BAR to Optimal preset resolution. Windows 7 For Windows 7: Click START. Click CONTROL PANEL. - Page 16 Click Appearance. Click DISPLAY. Set the resolution SLIDE-BAR to Optimal preset resolution...
-
Page 17: Windows Vista
Windows Vista For Windows Vista: Click START. Click CONTROL PANEL. Click Appearance and Personalization. Click Personalization... - Page 18 Click Display Settings. Set the resolution SLIDE-BAR to Optimal preset resolution...
-
Page 19: Windows Xp
Windows XP For Windows XP: Click START. Click SETTINGS. Click CONTROL PANEL. Click Appearance and Themes. Double click DISPLAY. -
Page 20: Windows Me/2000
Click SETTINGS. Set the resolution SLIDE-BAR to Optimal preset resolution Windows ME/2000 For Windows ME/2000: Click START. Click SETTINGS. Click CONTROL PANEL. Double click DISPLAY. Click SETTINGS. Set the resolution SLIDE-BAR to Optimal preset resolution... -
Page 21: Hotkeys
Hotkeys Source/Auto/Exit Game Mode/< Volume Menu/Enter Power Power Press the Power button to turn on/off the monitor. Menu/Enter Press to display the OSD or confirm the selection. > Volume When there is no OSD,Press Volume button to active volume adjustment bar,Press<or > to adjust volume(Only for the models with speakers) <... -
Page 22: Osd Setting
OSD Setting Basic and simple instruction on the control keys. Image Setup Color Setup Picture Boost OSD Setup Extra Exit Luminance Gamma 1 Contrast Gamma Game Mode Brightness Shadow Control Overdrive Medium Standard Eco mode Press the -button to activate the OSD window. Press <... -
Page 23: Luminance
Luminance Image Setup Color Setup Picture Boost OSD Setup Extra Exit Luminance Game Mode Gamma 1 Contrast Gamma Brightness Shadow Control Standard Overdrive Medium Eco mode Press (Menu) to display menu. Press < or > to select (Luminance), and press to enter. -
Page 24: Image Setup
Image Setup Image Setup Color Setup Picture Boost OSD Setup Extra Exit Luminance Clock H.Position Phase V.Position Sharpness Press (Menu) to display menu. Press < or > to select (Image Setup), and press to enter. Press < or > to select submenu, and press to enter. -
Page 25: Color Setup
Color Setup Color Setup Picture Boost OSD Setup Extra Exit Luminance Image Setup Color Temp. Warm DCB Mode Green DCB Demo Blue Press (Menu) to display menu. Press < or > to select (Color Setup), and press to enter. Press < or > to select submenu, and press to enter. -
Page 26: Picture Boost
Picture Boost Picture Boost OSD Setup Extra Exit Luminance Image Setup Color Setup Bright Frame Brightness H. position Frame Size Contrast V.position Press (Menu) to display menu. Press < or > to select (Picture Boost), and press to enter. Press < or > to select submenu, and press to enter. -
Page 27: Osd Setup
OSD Setup OSD Setup Image Setup Picture Boost Extra Exit Luminance Color Setup English Transparence Language H. position Timeout V.position Break Reminder Press (Menu) to display menu. Press < or > to select (OSD Setup), and press to enter. Press < or > to select submenu, and press to enter. -
Page 28: Extra
Extra Exit Luminance Image Setup Picture Boost OSD Setup Extra Color Setup Input Select Image Ratio wide Resolution: 1920(H)x1080(V) Auto Config DDC-CI H. Frequency: 6 7KHz Off timer Reset V. Frequency: 6 0Hz Press (Menu) to display menu. Press < or > to select (Extra), and press to enter. -
Page 29: Exit
Exit Extra Exit Luminance Image Setup Picture Boost OSD Setup Color Setup Press (Menu) to display menu. Press < or > to select (Exit), and press to exit. Press to exit. Exit Exit the main OSD LED Indicator Status LED Color Full Power Mode Green Active-off Mode... -
Page 30: Driver
Driver Monitor Driver Windows 8 Start Windows® 8 Right click and click All apps at the bottom-right of the screen. Click on the “Control panel” icon Set the “View by” to “Large icons” or “Small icons”. - Page 31 Click on the “Display” icon. Click on the “Change display settings” button. Click the “Advanced Settings” button.
- Page 32 Click the “Monitor” tab and then click the “Properties” button. Click the “Driver” tab. 10. Open the “Update Driver Software-Generic PnP Monitor” window by clicking on “Update Driver... “ and then click the "Browse my computer for driver software" button.
- Page 33 11. Select "Let me pick from a list of device drivers on my computer". 12. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory: X:\Driver\module name (where X is the drive letter designator for the CD-ROM drive). 13.
-
Page 34: Windows 7
Windows 7 Start Windows® 7 Click on the 'Start' button and then click on 'Control Panel'. Click on the 'Display' icon. Ckick on the “Change display settings” button. - Page 35 Click the “Advanced Settings” button. Click the “Monitor” tab and then click the “Properties” button. Click the “Driver” tab.
- Page 36 Open the "Update Driver Software-Generic PnP Monitor" window by clicking on “Update Driver... “and then click the "Browse my computer for driver software" button. Select "Let me pick from a list of device drivers on my computer". 10. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory: X:\Driver\module name (where X is the drive letter designator for the CD-ROM drive).
-
Page 37: Windows Vista
Windows Vista Click "Start " and "Control Panel". Then, double-click on "Appearance and Personalization". Click "Personalization" and then "Display Settings". Click "Advanced Settings...". - Page 38 Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means the configuration for your monitor is completed. The monitor can be used as is. If the message "Windows needs..." is displayed, as shown in the figure below, click "Continue". Click "Update Driver..."...
-
Page 39: Windows Xp
Windows XP Start Windows® XP Click on the 'Start' button and then click on 'Control Panel'. Select and click on the category ‘Appearance and Themes’ Click on the 'Display' Item. - Page 40 Select the 'Settings' tab then click on the 'Advanced' button. Select 'Monitor' tab - If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation. - If the 'Properties' button is active, click on 'Properties' button. Please follow the steps below.
- Page 41 Select the 'Install from a list or specific location [advanced]' radio button and then click on the 'Next' button. Select the 'Don't Search. I will choose the driver to install' radio button. Then click on the 'Next' button. 10. Click on the 'Have disk...' button, then click on the 'Browse...' button and then select the appropriate drive F: (CD- ROM Drive).
-
Page 42: Windows 2000
Windows 2000 Start Windows® 2000 Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. Double click on the 'Display' Icon. Select the 'Settings' tab then click on 'Advanced...'. Select 'Monitor' - If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation. - If the 'Properties' button is active. -
Page 43: I-Menu
Welcome to “i-Menu” software by AOC. i-Menu makes it easy to adjust your monitor display setting by using on screen menus instead of the OSD button on the monitor. To complete installation, please follow the installation guide. The software Supported operating systems:Windows 8, Windows 7,Windows Vista,Windows XP. -
Page 44: E-Saver
Welcome to use AOC e-Saver monitor power management software! The AOC e-Saver features Smart Shutdown functions for your monitors, allows your monitor to timely shutdown when PC unit is at any status (On, Off, Sleep or Screen Saver); the actual shutdown time depends on your preferences (see example below). -
Page 45: Screen
Screen+ Welcome to “Screen+” software by AOC. Screen+ software is a desktop screen splitting tool; it splits the desktop into different panels, and each panel displays a different window. You only need to drag the window to a corresponding panel when you want to access it. -
Page 46: Troubleshoot
Adjust the maximum resolution and frequency that the monitor can handle properly. • Make sure the AOC Monitor Drivers are installed. Adjust the Contrast and Brightness Controls. Picture Is Fuzzy & Has Press to auto adjust. -
Page 47: Specification
Specification General Specification Model name G2778VQ Driving system TFT Color LCD Viewable Image Size 68.6 cm diagonal Pixel pitch 0. 3114 mm(H) x 0. 3114 mm(V) Panel Video R, G, B Analog lnterface & HDMI lnterface & DP Interface Separate Sync. -
Page 48: Preset Display Modes
Preset Display Modes STANDARD RESOLUTION HORIZONTAL FREQUENCY(kHZ) VERTICAL FREQUENCY(Hz) 640×480 @60Hz 31.469 59.940 640×480 @67Hz 35.000 66.667 640×480 @72Hz 37.861 72.809 640×480 @75Hz 37.500 75.000 Dos-mode 720×400 @70Hz 31.469 70.087 800×600 @56Hz 35.156 56.250 800×600 @60Hz 37.879 60.317 SVGA 800×600 @72Hz 48.077 72.188 800×600 @75Hz... -
Page 49: Pin Assignments
Pin Assignments 15-Pin Color Display Signal Cable Pin Number Signal Name Pin Number Signal Name Pin Number Signal Name Video-Red GND-R N.C. Video-Green GND-G DDC-Serial data Video-Blue GND-B H-sync N.C. V-sync Detect Cable Ground DDC-Serial clock 19-Pin Color Display Signal Cable Pin No. - Page 50 20-Pin Color Display Signal Cable Pin No. Signal Name Pin No. Signal Name ML_Lane 3 (n) ML_Lane 0 (p) ML_Lane 3 (p) CONFIG1 ML_Lane 2 (n) CONFIG2 AUX_CH(p) ML_Lane 2 (p) ML_Lane 1 (n) AUX_CH(n) Hot Plug Detect ML_Lane 1 (p) Return DP_PWR ML_Lane 0 (n) DP_PWR...
-
Page 51: Plug And Play
Plug and Play Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. -
Page 52: Regulation
Regulation FCC Notice FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. -
Page 53: Weee Declaration
WEEE Declaration Disposal of Waste Equipment by Users in Private Household in the European Union. This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste.Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. -
Page 54: Epa Energy Star
AOC monitor’s packaging recycling program. This program is designed to help you discard of your monitor carton and filler materials properly. If a local recycling center is not available, AOC will recycle the packaging material for you, including foam filler and carton. AOC Display solution will only recycle AOC monitor packaging. Please refer to the... -
Page 55: Service
AOC Certified or Authorized Service Center under the following condition: • Make sure the LCD Monitor is packed in a proper carton box (AOC prefers the original carton box to protects your monitor well enough during transport). •... - Page 56 If your warranty has expired, you still have access to all available service options, but you will be responsible for the cost of service, including parts, labor, shipping (if any) and applicable taxes. AOC Certified or Authorized Service Center will provide you with an estimate of service costs before receiving your authorization to perform service.
-
Page 57: Warranty Statement For Middle East And Africa (Mea)
For AOC LCD Monitors sold within the Middle East and Africa (MEA) and the Commonwealth of Independent States (CIS), AOC International (Europe) B.V. warrants this product to be free from defects in material and workmanship for a period of One (1) to Three (3) years from the manufacture date depending on sale country. During this period, AOC International (Europe) B.V. - Page 58 If your warranty has expired, you still have access to all available service options, but you will be responsible for the cost of service, including parts, labor, shipping (if any) and applicable taxes. AOC Certified, Authorized Service Centeror dealerwill provide you with an estimate of service costs before receiving your authorization to perform service.
-
Page 59: Aoc Pixel Policy Iso 9241-307 Class 1
No manufacturer can guarantee that all panels will be free from pixel defects, but AOC guarantees that any monitor with an unacceptable number of defects will be repaired or replaced under warranty. This Pixel Policy explains the different types of pixel defects and defines acceptable defect levels for each type. -
Page 60: Warranty Statement For North & South America (Excluding Brazil)
In the United States and Canada contact your Dealer or EPI Customer Service, RMA Department at the toll free number (888) 662-9888. Or you can request an RMA Number online at www.aoc.com/na-warranty. * This limited warranty does not cover any losses or damages that occur as a result of: •... - Page 61 ARGENTINA: http://ar.aoc.com/support/warranty BOLIVIA: http://bo.aoc.com/support/warranty CHILE: http://cl.aoc.com/support/warranty COLOMBIA: http://co.aoc.com/warranty COSTA RICA: http://cr.aoc.com/support/warranty DOMINICAN REPUBLIC: http://do.aoc.com/support/warranty ECUADOR: http://ec.aoc.com/support/warranty EL SALVADOR: http://sv.aoc.com/support/warranty GUATEMALA: http://gt.aoc.com/support/warranty HONDURAS: http://hn.aoc.com/support/warranty NICARAGUA: http://ni.aoc.com/support/warranty PANAMA: http://pa.aoc.com/support/warranty PARAGUAY: http://py.aoc.com/support/warranty PERU: http://pe.aoc.com/support/warranty URUGUAY: http://pe.aoc.com/warranty VENEZUELA: http://ve.aoc.com/support/warranty IF COUNTRY NOT LISTED: http://latin.aoc.com/warranty...
-
Page 62: Ease Programe
*AOC will need to obtain a credit card number if you would like to get a new AOC monitor advanced shipped to your location, prior to the defective unit arriving at AOC’s service center. If you do not wish to supply a credit card, AOC will only ship the new monitor, once the defective unit arrives at the AOC service center.
Need help?
Do you have a question about the G2778VQ and is the answer not in the manual?
Questions and answers