Replacement Parts - Endless Summer GLT1332SP Owner's Manual

Need help? 1.800.762.1142
Do not return to place of purchase.
Assembly Instructions
1
DO NOT RETURN TO PLACE OF PURCHASE.
For assistance, call 1.800.762.1142 toll-free. Please have
your Owner's Manual and model number available for
reference.
Note: The model number is printed on a label which can be found on
the inside door, back or side of the base assembly.
Assembly Tips:
1. Select an area where you will assemble this product. To
protect components, choose a smooth non abrasive surface
that's free of cracks or openings.
2. Spread out all parts.
3. Tighten all hardware connections by hand first. Then, before
completing each step, go back and fully tighten all hardware.
Be careful not to over-tighten. That could damage surfaces or
strip threads.
4. For best results, complete each step in the order presented.
To complete assembly you will need:
• (1) Leak detection solution (instructions on how to make the
solution are included in the "Operating Instructions" section of
this manual).
• (1) 16.4 oz LP gas tank (not included).
Typical assembly is approximately 5 minutes.
2
Insert Glass Rocks

Replacement Parts

parts.BlueRhino.com
Installing LP Gas Tank
This fireplace is designed to operate with a 1 lb. / 16.4 oz.
propane gas tank (DOT 39 Cylinder).
DO NOT ATTEMPT TO REFILL ANY 1 lb. (16.4 oz.) PROPANE
GAS TANKS!
Connect LP Gas Tank
Only cylinders marked "propane" may be
used.
Note: Some 1-lb cylinders may form frost
when near empty.
1. Make sure the control knob is in the
" OFF" position (Figure 6).
2. Lubricate the threads of the regulator
with petroleum jelly. Line up threads on
LP gas tank with regulator.
3. Remove door (Figure 1).
4. Insert LP gas tank (Figure 1).
5. Rotate LP gas tank clockwise until they
fit snugly together. HAND TIGHTEN ONLY.
Be careful not to crossthread when
screwing in tank (Figure 2).
6. Perform leak test per "Checking for
Leaks" section.
Disconnect LP Gas Tank
1. Turn the control knob to the " OFF"
position (Figure 6).
2. Remove door (Figure 3).
3. Rotate LP gas tank counterclockwise
until it is loose. (Figure 4).
4. Remove LP gas tank (Figure 3).
5. Store the LP gas tank in a proper
location, per LP gas tank instructions.
1.800.762.1142
Figure 1
Figure 2
Figure 3
Figure 4
5
1 lb
453 g
3.875 in. / 9,8 cm