Samsung 6 series Installation Manual page 22

Hotel TV Function
Category Item
Sub AMP Mode
Bathroom
Speaker
Sub AMP Volume
Eco
Energy Saving
Solution
Welcome Message
Edit Welcome Message
Hospitality Logo
Logo/
Message
Hospitality Logo DL
Logo Display Time
Clone TV to USB
Clone USB to TV
Cloning
Setting Auto Initialize
REACH Server Update Time
REACH Update Immediate
REACH Server Channel
REACH Server Version
REACH
REACH Server Group ID
Solution
REACH
Background TV Sound
TICKER
AppLite
Room Number Setting
Network Setup
SmartHub Model Setting
Network
SmartHub Setting
22
English
Description
initial value
Determines the Sub AMP operation mode.
• 0: Turns the Sub AMP function off (PWM off).
• 1: Determines the Sub volume according to the main volume control.
2
That is, the sub volume is determined according to the Power On Volume, the Min
Volume, and the Max
• 2: Determines the volume according to the bathroom control panel setting.
6 Sub AMP Volume level at power on initial condition.
Adjusts the brightness of the TV to reduce power consumption.
• Off: Turns off the energy saving function.
Off • Low: Sets the TV to low energy saving mode.
• Medium: Sets the TV to medium energy saving mode.
• High: Sets the TV to high energy saving mode.
OFF displays on Welcome Message.
Edit the Welcome Message.
Turns the Hospitality logo feature On or Off, if On, when the TV isturned on, the Logo is
OFF displayed, before the signal from the initial source, for the amount of time set in "Logo
Display Time"
Downloads the Hospitality logo.
Hospitality logo file requirements:
...
• BMP or AVI files only.
• Max file size : BMP - 960 X 540. AVI - 30MB.
• The file can only be named samsung.bmp or samsung.avi.
... Set the logo display time (3/5/7 Seconds).
Clone the current TV option values to a USB memory device.
Clone the saved TV option values in a USB memory device to the TV.
When Setting Auto Initialize is set to On, and the power is turned off and on or the Master
Power is turned off and on, the data is restored to the cloned values. If there is no cloned
OFF
value, even when the Setting Auto Initialize is set to On, it will be ignored and the operation
will be the same as that whenSetting Auto Initialize is set to Off
1hour Standby REACH Server will be operated, according to time setting
OFF Make TV operate REACH Server after 1 minute in Stand-by mode.
Set the default channel for REACH Server
87 • None : After Auto Scan, Operate REACH Server
• Channel value : Operate REACH Server at the channel selected
0000 Display REACH Server version of TV
All Provided REACH Server ID for operating SIRCH on a specific set.
... Set whether to use REACH function.
OFF Background TV Sound On and Off
OFF Ticker On and Off
• On : The Applite content is displayed.
...
• Off : The Applite content is not displayed.
... • Setting Room Number.
Set an IP address to establish an Internet connection.
Set SmartHub Model.
Set up SmartHub.