Use
Charge the Battery
The first charge will take about 20-24 hours.
1.
Slide the battery charger port window
up (located next to left door), and insert
the battery connector.
2.
Plug the
into a standard 120V
charger
wall outlet.
Note:
The charger may feel warm during
charging. This is normal and not a
cause for concern.
3.
After charging is complete (at least 14
hours, but no more than 18 hours, with
the first charge taking about 20-24
hours) unplug the charger from the wall
outlet and unplug the battery connector
from the charger port.
Vehicle Controls
1. Power Switch:
Turns the vehicle on
and off.
2. Sound Effects:
Pressing the button on the
right side of the steering wheel will make
a muscle car sound effects. Pressing
the right side will make a police scanner
sound effect.
3. Siren Lights:
Turns on the red and blue
flashing lights and siren.
4. Battery Power Indicator:
three lights above the Battery Power
button Indicate the battery power level.
5. Megaphone:
Press the button on the side of
the megaphone and talk.
The sound will come out of a speaker in
the dashboard.
6. Foot Pedal:
Applies power (speed) to the
vehicle. To slow down or stop, lift your
foot off the pedal.
7. Shift Handle:
Changes the direction from
forward to reverse. You may remove
the small screw at the base of the shift
handle for higher speeds.
When pressed, the
2
1
2
6
5
1
4
3
7
12
Need help?
Do you have a question about the Dodge Charger Police Car KT1111WM and is the answer not in the manual?
Questions and answers