Paper Conveying Operation In Sort Mode - Olivetti DF-670 Service Manual

3LB

(1) Paper conveying operation in sort mode

In the sort mode, the feedshift solenoid (FSSOL) turns on and the feedshift guide of the machine operates to switch the
paper path to the paper conveying unit. After curling of the conveyed paper is eliminated by the curl eliminator rollers, the
paper is conveyed to the process table by the feedshift roller. When the trailing edge registration cursor of the process
table shifts the paper stocked in the process table to the stopper, the pickup solenoid (PUSOL) turns on to lift the press
roller and release the stopper. The stack of paper on the process table is ejected to the finisher tray by the feedshift roller
and eject roller.
Eject pulleys
To finisher tray
Eject roller
2-1-2
Upper curl
Feedshift solenoid
eliminator roller
Lower curl
eliminator roller
Feedshift guide
(FSSOL: ON)
Feedshift claw
Feedshift roller
Figure 2-1-3
Service Manual
Feedshift pulleys
Feedshift roller
Stopper
Press roller
(PUSOL: OFF)
Feedshift pulley
Press roller
Stopper
(PUSOL: ON)
To process table
Pickup solenoid
Y108690-3