Table of Contents
Advertisement
CC62
Drive Belts
Avoid injury caused by hands or clothing being caught between belts and pulleys. Make sure engine is
shut off and ignition key is removed before inspecting belts.
All drive belts must be periodically inspected for condition and tension.
Perform the following inspections of alternator drive belt and seawater pickup pump drive belt.
If any drive belts need replacement or tension needs adjustment see your Authorized MerCruiser Dealer.
1
Alternator Drive Belt - Inspect drive belt for excessive wear or damage.
Check belt tension by depressing upper strand of belt at point shown. Belt should depress 1/2 in. (13mm)
2
Seawater Pump Drive Belt - Inspect drive belt for excessive wear or damage.
Check belt tension by depressing upper strand of belt at point shown. Belt should depress 1/4 in. (6mm).
!
WARNING
43
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 350 Magnum MPI and is the answer not in the manual?
Questions and answers