Management Panel; Rj-45 Serial Console Port - Lenovo G7028 Installation Manual

Management Panel

RJ-45 Serial Console Port

20
G7028 Installation Guide
The RJ-45 port on the front management panel is available for switch console
management. The port operates using RS-232 serial communications. A compatible
console cable kit is included with the switch.
To connect a computer or terminal to the switch using the included kit, first connect
one end of the Category 5 patch cable to the RJ-45 serial port on the G7028, then
connect the other end of the patch cable to the RJ-45-to-DB9 adapter (see the
following illustration).
Figure 4. Console cable connections
To Console
Port
Note: The console cable kit includes a USB cable that is not supported for the
G7028. You may discard this cable.
If using cables other than those from the included kit, ensure that they are
compatible with the port pin assignments shown in the following table.
Table 1. Switch RJ-45 connector pin assignments
Pin Number Function
1 Not applicable
2 Not applicable
3 TxD (Transmit Data)
4 GND (Ground)
5 GND (Ground)
6 RxD (Receive Data)
7 Not applicable
8 Not applicable
Category 5
Patch Cable RJ-45 to DB9 Adapter
To PC
Terminal