Moon Phase; Backlight; Reset System; Safety And Care - Oregon Scientific BAR609HGA User Manual

MOON PHASE

The Calendar must be set for this feature to work.
see set clock section:
• Press or to view the moon phase for the next
or previous day.
• Press and hold or
years (2001 to 2099).

BACKLIGHT

Press SNOOZE / LIGHT to activate the backlight for
8 seconds.
to scan quickly through the
New Moon
Waxing Crescent
First Quarter
Waxing Gibbous
Full Moon
Waning Gibbous
Last Quarter
Waning Crescent

RESET SYSTEM

The RESET button is located behind the front button
panel for the main unit. Press RESET when you change
the batteries and whenever performance is not behaving
as expected (for example, unable to establish radio
frequency link with sensor or Atomic Clock).
NOTE When you press RESET, all settings will return to
default value, and you will lose all stored information

SAFETY AND CARE

Clean the product with a slightly damp cloth and alcohol-
free, mild detergent. Avoid dropping the product or
placing it in a high-traffic location.

WARNINGS

This product is designed to give you years of service if
handled properly. Observe the following guidelines:
• Never immerse the product in water. This can
cause electrical shock and damage the product.
• Do not subject the main unit to extreme force,
shock, or fluctuations in temperature or humidity.
• Do not tamper with the internal components.
• Do not mix old and new batteries. Do not mix
alkaline, standard (carbon-zinc), or rechargeable
(nickel-cadmium) batteries.
14