Pad Printing; Fiery Remote Scan - EFI Fiery FS150 Pro Product Manual

Mixed Media viewer user interface

Pad Printing

Pad printing gives operators the ability to print multiple copies of a job
without having to perform unnecessary mental calculations or multiple steps.
Previously the operator had to multiply the number of pages in the pad of
paper by the number of pads, manually separating the pads after printing.
Now, Job Property controls in the Finishing tab let the operator specify pad-
printing parameters. The operator can define the contents of each pad in the
Finishing tab, including the number of times the job repeats within a pad. It
duplicates a single job as many times as defined in the Pad Printing settings
to create one finished/merged pad. Users can even add a back cover/slip
sheet between each pad. Pad printing also allows operators to simply
assemble printed pads with a back cover, similar to sticky notes. Operators
can use the Number of Copies control to specify the number of pads in the
job. Pad copy packs are offset in the output tray for easy separation for
offline binding. The feature is available for FS100 Pro (and later) Fiery
servers.
Benefits:
Simplifies and streamlines pad printing in one print job.
Enables the operator to create a pad easily from a single-page job.
Minimizes manual collation of the printed output.

Fiery Remote Scan

Nearly all documents today exist in digital form. Most corporate and print production workflows are designed to handle digital documents
efficiently. However, there are still substantial volumes of hardcopy documents that users need to include in their digital workflows.
Scanning technology is readily available in most commercial print shops or corporate in-plant and reprographics departments but is not
typically available to corporate workgroups where most of the content providers work.
Users can select the number of copies per pad
74