Power Supply - HP EliteDesk 800 G2 SFF Maintenance And Service Manual
Hide thumbs
Also See for EliteDesk 800 G2 SFF:
- Maintenance and service manual (143 pages) ,
- Hardware reference manual (52 pages) ,
- Disassembly instructions manual (13 pages)
Table of Contents
Advertisement
Power supply
Description
Power supply, 200W, 92% efficient
Power supply, 200W, 85% efficient
Power supply, 200W, standard
WARNING!
replacement power supply provided by HP, or a power supply purchased as an accessory from HP should be
used with the computer.
WARNING!
outlet. To avoid possible personal injury and damage to the equipment the power cord should be
disconnected from the computer and/or the AC outlet before opening the computer.
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Rotate the drive cage up.
4.
From the outside, rear of the chassis, remove the three Torx T15 that secure the power supply to the
back of the chassis.
60
Chapter 4 Removal and replacement procedures – small form factor (SFF) chassis
To reduce potential safety issues, only the power supply provided with the computer, a
Voltage is always present on the system board when the computer is plugged into an active AC
(Access panel on page
(Preparation for disassembly on page
19).
18).
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the EliteDesk 800 G2 SFF and is the answer not in the manual?
Questions and answers
Como puedo eliminar la contraseña de la BIOS