Connecting To A Wireless Network - Bush LED24265DVDCNTD Installation & Operating Instructions Manual

Connectivity Functions

Connecting to a Wireless Network

IMPORTANT: "Veezy 200" USB dongle (sold
separately) is required to use wireless network
feature.
• To use your TV with your wireless network,
you need a Veezy 200 Wireless USB dongle.
To make your modem' s SSID visible, you
should change your SSID settings via modem's
software. The TV cannot connect to the networks
with hidden SSID.
For connecting to a wireless LAN network,
you should perform the following steps:
1. Connect broadband ISP connection ethernet
cable to the ETHERNET INPUT of your modem.
2. Ensure that Nero Media Home software is
installed to your PC (for DLNA function).
3. Afterwards, you should connect wireless
adaptor to one of the USB inputs of the TV.
4. To configure wireless settings please refer
Network Settings section in the following
sections.
• A Wireless-N router (IEEE 802.11a/b/g/n) with
simultaneous 2.4 and 5 GHz bands designed
to increase bandwidth. Optimized for smoother
and faster HD video streaming, file transfers, and
wireless gaming.
• Use LAN connection for quicker file sharing
between other devices like computers.
• The frequency and channel differ depending
on the area.
• The transmission speed differs depending on
the distance and number of obstructions between
the transmission products, the configuration
of these products, the radio wave conditions,
the line traffic, and the products that you use.
The transmission may also be cut off or get
disconnected depending on the radio wave
conditions DECT phones, or any other WiFi
11b appliances. The standard values of the
transmission speed are the theoretical maximum
values for the wireless standards. They are not
the actual speeds of data transmission.
• The location where the transmission is
most effective differs depending on the usage
environment.
• Wireless LAN adaptor should be connected
directly to the TV's USB port. USB hubs are not
supported.
For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105
• To configure wireless settings please refer
wifi section in Settings menu.
• Wireless LAN adaptor supports 802.11 a,b,g
& n type modems. It is highly recommended that
you should use IEEE 802.11n communication
protocol in order to avoid any possible problems
while watching videos.
• Use the other usb input, if you experience
problems with audio/video performance.
• You must change your modem's SSID when
there are any other modems around with the
same SSID. You can encounter connection
problems otherwise. Use wired connection
instead if you experience problems with wireless
connection.
fig.1
41