Hitachi Compute Blade 500 Series System Overview Manual page 42

Location
6
Brocade 8 Gb/sec Fibre Channel Switch Module
Table 1-23 Brocade 8 Gb/sec Fibre Channel Switch Module Switches,
Location
1
2
3
4
5
6
1-34
Name
Uplink ports:
1 - 8
Figure 1-40 Brocade 8 Gb/sec Fibre Channel Switch Module
Indicators and Connectors
Name
Identify LED (LOCID)
Power LED (PWR)
Status LED
FC ports: 0 - 5
Uplink port status LED1
Uplink port status LED2
System Overview
Hitachi Compute Blade 500 Series System Overview Guide
State
Green-Blink Irregular blink: Link communication.
Slow blink: LAN interface online, but
segmented.
Rapid Blink: Diagnostic internal loop
back.
- By default these ports do not have
transceivers installed. The type of
transceiver varies according to usage.
State
Blue-On The switch module is identified.
Green-On Powered-on, normal operation.
Green-On Normal operation.
Green-Blink Power-on diagnostics or firmware
activation.
Red-Blink Fault. Max temperature limit exceeded
or other warning.
Red-On Alarm.
- SFP+ module slots for connection of
fibre channel cables
Amber-On Signal or communication received, but
not online.
Amber-Blink Slow blink: The port is disabled.
Rapid blink: The port has failed.
Green-On FC port is online.
Description
Description