Hitachi 70VS810 Service Manual page 34

II. FEATURES AND FUNCTIONS
4.2 CHANNEL MANAGER (CONT.)
Signal Meter
Select Signal Meter when using an indoor or outdoor antenna. This feature will show the signal strength and peak
values of the Antenna signal to help you adjust your antenna to optimize signal reception.
Chan. Manager
Set The Antenna
Auto Chan. Scan
Signal Meter
Channel List
Move
SEL
Use the CURSOR PAD and the SELECT button to highlight and select "close" to exit.
NOTE: The Signal Meter will not be available (grayed out) when watching analog channels.
Channel List
This function allows you to review which channels are labeled (CH ID), which have been added to Channel
Memory (SCAN), which are protected by LOCK and which are your Favorite (FAV) Channels.
Chan. Manager
Set The Antenna
Auto Chan. Scan
Signal Meter
Channel List
Move
SEL
Use the CURSOR PAD to navigate the Channel List.
Press the CURSOR PAD ( ,
Press the EXIT button to return to normal viewing.
NOTE: When a CableCARD is installed, the Channel List will be dependent on channels agreed upon by you and your cable
operator.
Return
Return
) to select On or Off on the Scan column.
Chan. Manager
Signal Meter
Channel
Strength
Peak
Move Return
SEL
Channel List (Cable)
CH#
3
FAV
FAV 4
5
6
7
8
9
10
/
Move Return
SEL
34
LC37/LC37F
: 3-
: 1
: 1
Close
Scan CH ID Lock
On -------
On -------
On -------
On -------
On -------
On -------
On -------
On -------