Switching The Lighting On/Off; Switching The Fan On/Off - Miele DA 1160 Operating And Installation Instructions

a Controls
b Cooktop lighting
c Charcoal filter
Special accessory for recirculation
mode
d Cover for the charcoal filter duct
e Grease filters
f Exhaust socket C 125 mm or
150 mm
g Non-return flap
h Air outlet for air extraction
i Air outlet for air recirculation
j Rotary control for the cooktop
lighting (DA 1050-55, DA 1060)
k Rotary control for the fan
(DA 1050-55, DA 1060)
l Slide control for the cooktop
lighting (DA 1160, DA 1100)
m Slide control for the fan (DA 1160,
DA 1100)

Switching the lighting on/off

The cooktop lighting (j, l) can be
switched on and off independently of
the fan.
"0" – Lighting off
"1" – Lighting on

Switching the fan on/off

^ The controls k and m are used to
switch the fan on and off and to
select the fan power setting.
^ "0" – Fan off
^ Settings "1" to "3" are usually
sufficient for normal cooking.
^ DA 1160, DA 1100: When frying or
cooking food with a strong aroma,
you may wish to select the intensive
setting (IS) for a short period.
After cooking
It is advisable to run the fan for a few
minutes after cooking has finished to
neutralise any lingering odours in the
air, whether you are using air extraction
or recirculation mode.
Operation
11