Bluetooth ® Operation; Pairing - Yaesu FTM-350AR Operating Manual

B
LUETOOTH ®
When the optional BU-1 Bluetooth
can use wireless links to send/receive voice message with the optional BH-1A or BH-2A
Headset.
®
Bluetooth
1. Turn both the radio and Bluetooth
2. To enter the "Special Function" mode, turn the transceiver on while press and holding
the key located at the left of the [ POWER ] switch.
3. Rotate the left side [ DIAL ] knob to select the function menu item "9 B-T PAIRING".
4. Press the left side [ DIAL ] knob.
5. Press and hold the power switch on the Bluetooth
Headset indicator blinks red/blue alternately.
Bluetooth ®
6. Press the left side [ DIAL ] knob to initiate the pairing.
7. If the pairing is successful (requires 20 to 30 seconds), the "PAIRING OK !" notation
will appear on the display. The transceiver will turn off and back on again.
When the Bluetooth
ceiver, the Bluetooth
8. Set up the various functions of the Bluetooth
BLUETOOTH".
18
O
PERATION
Unit is installed, the FTM-350 Series Transceiver
®
P
AIRING
Headset off.
®
Headset is correctly recognized by the FTM-350 Series Trans-
®
Headset's indicator will blink blue.
®
Headset for five seconds, until the
®
via Set Mode items "K01
®
FTM-350AR/AE O M
PERATING ANUAL