Bluetooth Audio - Kenwood DPX792BH Instruction Manual

BLUETOOTH®
Bluetooth test mode
You can check the connectivity of the supported
profile between the Bluetooth device and the
unit.
• Make sure there is no Bluetooth device paired.
1
Press and hold .
"PLEASE PAIR YOUR PHONE PIN 0000"
appears.
2
Search and select this unit model name
(DPX79 * BH/ DPX70 * BH/ DPX59
DPX50 * BT) on the Bluetooth device.
3
Operate the Bluetooth device to confirm
pairing.
"TESTING" flashes on the display.
The connectivity result (OK or NG) appears
after the test.
PAIRING: Pairing status
HF CNT: Hands-Free Profile (HFP)
compatibility
AUD CNT: Advanced Audio Distribution Profile
(A2DP) compatibility
PB DL: Phonebook Access profile (PBAP)
compatibility
To cancel test mode, press and hold
turn off the unit.
20
BLUETOOTH — Audio
* BT/
Audio player via Bluetooth
1
Press
2
Operate the Bluetooth audio player to start playback.
To
Playback / pause
Select group or folder
Reverse / Forward skip
Reverse / Fast-forward
Repeat play
to
Random play
Select a file from a
folder/list
Operations and display indications may differ according to their availability on the connected
device.
repeatedly to select BT AUDIO (or press SRC on RC-406).
On the faceplate
Press .
Press J / K.
Press S / T.
Press and hold S / T.
Press repeatedly.
ALL REPEAT, FILE REPEAT, REPEAT OFF
Press and hold
ALL RANDOM.
• Press to select RANDOM OFF.
Refer to "Select a file from a folder/
list" on page 9.
On the remote control
Press
Press
Press S /
Press and hold S /
( Not available )
to select
( Not available )
( Not available )
.
/ .
.
.