Kyocera Torque g02 Basic Manual

Preface
Thank you for buying the "TORQUE G02" (simply called the "product" or "main
unit" from here on).
Before use, please read the "Setting Guide", "Notes on Usage", or "Basic
Manual" (This Manual) for proper usage.
Basic Manual
List of Packaged Items
Before your start using the product, make sure that you have all the following
packaged with the product.
G02
May 2015, 1st Edition
Cell Phone Etiquette Notations Used in This Document
■ Use of the product is not allowed in the following ■ Note on Button Illustrations
places! In this manual, buttons are represented by simplified illustrations as shown
below.
• Do not listen to music or watch videos or TV while driving a car or motorbike,
or riding a bicycle. Use of cell phones while driving a car or motorbike is
prohibited by law. (Use of cell phones while riding a bicycle may also be r (Volume UP button)
punishable by law.) In addition, stay alert to the traffic around you even when
l (Volume DOWN button)
walking. Surrounding sounds may not be heard clearly, and gazing at the
screen might distract your attention causing a traffic accident. Be especially
careful at railroad crossings, on a platform, and at pedestrian crossings.
• Use of cell phones on board is restricted. Follow the instructions of each
z (Direct button)
airline.
■ Consider people around you!
• To prevent ringtone from bothering other people, not only refrain from making
a call but also power off or use Silent mode at a movie theater, theater,
museum, library, etc.
• In a city area, use in a place where you do not bother people walking.
• It is extremely dangerous to walk while looking at the screen of the cell
phone. Do not make calls or operate a cell phone while walking or by
■ Description of Operations for Selecting Item/Icon/
stopping suddenly.
Button etc.
• Move to a place where you do not disturb others while you are in shinkansen,
a hotel lobby, etc.
The notations used for operation procedures in this manual are as follows.
• Be careful not to be loud while talking.
Tapping is to select a key or icon displayed on the screen by lightly tapping it
• Be careful of sound leakage from earphones in trains or other places with
with your finger.
many people around you.
• Ask permission if you take photos with your cell phone camera. Description
• There may be a person with a cardiac pacemaker nearby at a place filled
On the Home screen
with people such as in a crowded train. Set "Airplane mode" or turn off → [Phone] →
beforehand. [1][4][1] → [CALL]
• When a medical institution has laid down designated areas where use of the
In sleep mode, F
product is prohibited or is not allowed to be brought in, abide by the
* Unless specified otherwise, steps describe operations using onscreen keys.
instructions of that medical institution.
- 6 -
⑮ External connection terminal cover
Battery pack
The opening in the cover is a necessary part of its waterproof construction. Remove the battery cover and then the battery pack to access the au Nano
Do not poke with a pointed object or block it. IC Card 04 slot and microSD memory card slot.
⑯ External connection terminal
knob lock
Used for connecting Common AC Adapter 05 (sold separately), microUSB
Wireless charging antenna connection
Cable 01 (sold separately), etc.
microSD memory card slot
⑰ F Power button
au Nano IC Card 04 slot
Power ON/OFF, activate/deactivate Sleep mode, etc.
Microphone opening
⑱ k Camera button
Wireless charging antenna*/charging connection area
Press and hold to activate camera. Also use as shutter for still photos and
* Do not cover antennas with your hand or put stickers etc. It might affect
underwater camera screen.
communication quality.
⑲ Options port
⑳ Built-in GPS antenna*
Built-in sub antenna*
◎ Do not place stickers, etc. over proximity sensor/light sensor.
Built-in Bluetooth ® /Wi-Fi ® antenna*
◎ Product is equipped with an atmospheric pressure sensor. You can
Photo light/Simple light
display barometric pressure and elevation when using a barometric
Out camera (lens)
display app, however, values are not absolute due to a number of
f mark
variables, and are approximate only.
®
Hold the f mark over the reader/writer when using Osaifu-Keitai .
◎ Do not remove film sheet from atmospheric pressure sensor inlet/
Send or receive data via IC transmission.
adjustment area or microphone opening.
Back cover
Wireless charging area
For wireless charging, place the center of this portion on the q mark on a Attaching/Removing a Battery Pack
separately-sold wireless charging pad.
Speaker Use the battery pack for this product and attach it properly.
Ringtone or alarm sound can be heard from here.
Built-in WiMAX 2+ antenna*
Built-in main antenna*
◎ Before attaching/removing the battery pack and battery cover, turn the
Atmospheric pressure sensor inlet/adjustment area
power off.
NFC (FeliCa compatible) antenna*
Battery cover
- 12 -
Removing a Battery Pack
Remove back cover, battery cover (▶P. 14)
◎ Before attaching/removing au Nano IC Card 04, be sure to remove a
power plug of specified AC adapter etc. from the product.
Pull battery pack up by tab and remove
Tab
Attaching the au Nano IC Card 04
Battery pack
Turn the power off and remove the battery pack
(▶P. 18 "Removing a Battery Pack")
Pull tray straight out by groove
Attach back cover, battery cover (▶P. 14)
◎ When removing the battery pack, be sure to pull up by the tab. Trying to
pull up from any direction other than at the tab may damage the product
Place au Nano IC Card 04 on tray (IC (metal) part up) and
or the battery connection.
push tray with au Nano IC Card 04 all the way in
Note direction of notch.
au Nano IC Card 04
The au Nano IC Card 04 contains customer phone number and other
information.
The product is compatible with au Nano IC Card 04 only. You cannot use the
product with an IC card other than au Nano IC Card 04.
au Nano IC Card 04
Attach battery pack, battery cover, and back cover (▶P. 14)
IC (metal) part
- 18 -
Battery pack
(KYV35UAA)
Kyocera TV antenna cable 03
(03KYHSA)
* Kyocera TV antenna cable 03
(03KYHSA) is not waterproof/dustproof.
Main unit Back cover
(KYV35TGA/KYV35TRA/
KYV35TKA)
* Installed on back of main unit
◎ Purchase a specified charger (sold separately).
◎ The illustrations of cell phone in the manual are used only for explaining.
They may differ from the actual product.
- 1 -
■ Notes on Illustrations/Screenshots
This manual gives screens and operations for the product with an au Nano IC
Card 04 installed.
Screen illustrations shown in this manual may look different from the actual
screens.
In some cases, minor details or a part of a screen may be omitted.
In this manual, some
icons on a screen
F
are omitted.
k
C N
H
◎ Operations from the vertical display are mainly described. Menu items/
icons/buttons on a screen may be different from the ones in the horizontal
display.
◎ Menu items/layers/icons may be different depending on functions,
conditions, etc.
◎ In this manual, screenshots for body color "Green" are provided as
Explanation
examples.
Tap " (Phone)" at the bottom of the Home ◎ In this manual, "microSD™ memory card", "microSDHC™ memory card"
screen. And tap " ", " ", " ", then
and "microSDXC™ memory card" are abbreviated as "microSD memory
tap " " (Outgoing call) at the end.
card" or "microSD".
In sleep mode, press F. ◎ All of the indicated amounts exclude tax unless otherwise specified.
- 7 -
Attaching a Battery Pack
Remove the back cover of the back side of the product
Lift the back cover by the notch at its bottom (use fingernail, etc.) in the
direction shown to remove.
Slide knob lock in direction of "UNLOCK"
- 13 -
Removing the au Nano IC Card 04
Turn the power off and remove the battery pack
(▶P. 18 "Removing a Battery Pack")
Pull tray straight out by groove
Remove au Nano IC Card 04, and reinsert tray straight in
Groove
Attach battery pack, battery cover, and back cover (▶P. 14)
Notch
- 19 -
About Operating Instructions
■ "Basic Manual" (This manual)/"Setting Guide"
Handles only basic operations for main features.
For detailed descriptions on various functions, refer to the "Instruction Manual
application" (Japanese) installed on the product or "取扱説明書 詳細版 (Full
Instruction Manual)" (Japanese) available on the au homepage.
（
h ttp://www.au.kddi.com/support/mobile/guide/manual/）
• Company names and product names referred to in this manual are
trademarks or registered trademarks of respective companies.
Battery cover
(KYV35TBA) ■ "Instruction Manual Application" (Japanese/English)
* Installed on back of main unit
You can use the "Instruction Manual application" (Japanese) on the product to
• 取扱説明書 (Basic Manual)
confirm detailed operational procedures. Certain functions can be directly
(Japanese)
activated from the application screens on which their operations are
• ご利用にあたっての注意事項
described.
(Notes on Usage) (Includes Home screen → [Apps] → [取扱説明書 (Instruction Manual)]
warranty) (Japanese)
Also, you can use the "Instruction Manual application" (English version) on the
• 設定ガイド (Setting Guide)
product to check operational procedures.
(Japanese) Home screen → [Apps] → [Basic Manual]
The following items are not included
• To use the applications for the first time, you need to download and install
in the package. them by following on-screen instructions.
• microSD memory card
■ Downloading Manuals
• Wireless charging pad
You can download the English version of the Basic Manual from the au
• AC adapter
website.
• microUSB cable
Download URL:
• Earphones
（
h ttp://www.au.kddi.com/english/support/manual/）
When Using the Product
Before using the product, be sure to read the "Notes on Usage" for proper
usage.
Before you assume that the product is malfunctioning, check for possible
remedies in the following au Customer Support site of au homepage:
（
h ttp://www.au.kddi.com/english/support/）
- 2 - - 3 -
Names and Functions of Parts
Actual screen Notations used in this manual
⑥ ⑦
①
②
③
- 8 - - 9 -
Open battery cover
Lift the battery cover at the ▼ mark at its bottom right (use fingernail, etc.)
Confirm location of connection, and then slide battery
pack in and press firmly into place
Notch
Make sure tab is visible on top.
Battery pack
Connection
- 14 - - 15 -
Attaching/Removing a microSD Memory
Card
Attaching a microSD Memory Card
Turn the power off and remove the back cover and battery
pack (▶P. 14)
Confirm the direction of the microSD memory card and
slowly insert it into the slot until it clicks
Groove
Insert a microSD memory card until you hear a click and confirm it is
locked. Releasing the microSD memory card before it is locked may
cause it to pop out.
microSD
logo facing
up
Attach battery pack, battery cover, and back cover (▶P. 14)
◎ Insert a microSD memory card with the right side up in the appropriate
direction. Inserting a microSD memory card forcefully into the slot could
result in failure to remove the microSD memory card or damage to the
microSD memory card.
- 20 - - 21 -
• Communication is not possible even inside the service area in places where
the signal does not reach (e.g. tunnels and basements). Also,
communication is sometimes not possible in poor reception areas.
Communication is sometimes interrupted if you move into a poor reception
areas during communications.
• Since this product uses radio waves, the possibility of communication
intercepts by third parties cannot be eliminated. (Though LTE/WiMAX 2+/
GSM/UMTS system has highly secure confidential communication features.)
• When connecting to emergency services in Japan, use au VoLTE (LTE
network). You cannot connect through 3G (circuit switching network).
• This product is compatible with the international roaming service. Each
network service described in this manual varies depending on the area and
service content.
• Since this product is a radio station under the Radio Law, you may be asked
to temporarily submit the product for inspection in accordance with the
Radio Law.
• IMEI information of your cell phone is automatically sent to KDDI
CORPORATION for maintenance and monitoring operational status of your
cell phone.
• Before you start using the product overseas, check the relevant laws and
regulations of the country/region you visit.
• The Company is not liable for any damages arising from earthquakes,
lightning, storms, floods or other natural disasters, as well as fires, actions
by third parties, other accidents, intentional or mistaken misoperation by the
customer, or use under other unusual conditions outside the responsibility of
the Company.
• The Company is not liable for any incidental damages (change/
disappearance of described content, loss of business income, disruption of
business, etc.) arising from use or inability to use the product.
• The Company is not liable for any damages arising from failure to observe
the described content of this manual.
• The Company is not liable for any damages arising, for example, from
malfunction caused by combination with connected devices or software not
related to the Company.
• Captured image data or downloaded data may sometimes be altered or lost
due to faults, repair or other handling of the product. The Company is not
liable for any damage or lost income resulting from recovery of these data.
- 4 -
⑳
④
⑤
⑧ ⑨
⑰
⑩
⑱
⑪
⑲
⑫
⑬
⑭
⑮
⑯
- 10 -
Insert tabs on battery cover in slots on product and close
battery cover
②
①
Press along cover where shown from ① to ②, making sure
there are no gaps all around battery cover
Battery cover
①
Slide knob lock in direction of "Lock" to lock firmly
If knob lock is not locked, the back cover cannot be closed.
- 16 -
Removing a microSD Memory Card
Turn the power off and remove the back cover and battery
pack
Slowly push the microSD memory card toward the slot
until it clicks
When a click sound is heard, pull your finger with the microSD memory
card touched. Keep putting your finger on the microSD memory card until
it comes out a little. Releasing the microSD memory card when pushed
hard may cause it to pop out.
Slowly remove the microSD memory card
Slowly pull the microSD memory card straight out.
Some microSD memory cards cannot be unlocked and do not come out
smoothly. In such case, pull it out with your finger.
Attach battery pack, battery cover, and back cover (▶P. 14)
◎ Do not touch the terminal part of microSD memory card.
◎ Do not remove the microSD memory card forcefully. It may result in
damage to the microSD memory card or the data loss.
◎ The microSD memory card may be warm after a long time use. It is
normal.
- 22 -
• It is recommended you keep a copy of important data in your PC's hard disk,
etc. Whatever the cause of fault or malfunction may be, the Company
assumes no responsibility for alteration or loss of saved information.
• Contents saved in the product, such as contacts, mails and favorites, might
be altered or lost in an accident, fault, repair or mishandling. Be sure to keep
a copy of important contents. Note that Company assumes no responsibility
for any damages or lost profits resulting from altered or lost contents.
• Note that content data (both charged or free content) saved with the product
cannot be returned to the customer when the product is replaced for repair
of a fault, for example.
• The product uses liquid crystal for its display. The display response speed
may become slow when the ambient temperature is low, which is due to the
property of liquid crystal and not a malfunction. Display response speed will
return to normal at room temperature.
• Although the display used on the product is made using high-precision
technology, some pixels (dots) might be lit or out at all times. This is not a
malfunction.
• You are recommended to store copies of individual data such as photos you
took, videos and music on your PC by sending each file as mail attachment,
etc. Note, however, that you may not be able to make copies of any
copyrighted data even by the above-mentioned means.
• Do not discard the product together with regular trash. Please cooperate in
the collection of the product when it is no longer needed to protect the
environment and effectively use resources. Old product is collected at au
shops and other places.
* "The Company" as appears in this manual refers to the following companies:
Sold by: KDDI CORPORATION, OKINAWA CELLULAR TELEPHONE COMPANY
Manufactured by: KYOCERA Corporation
■
Note
• Reproduction of the content of this manual in part or in whole is
prohibited.
• The content of this manual is subject to change without notice.
• Every effort has been made in the preparation of this manual. Should
you notice any unclear points, omissions, etc., feel free to contact us.
- 5 -
① d Volume UP/DOWN button
Adjusts sound volume. Press and hold l (Volume DOWN button) on left
side to set "Silent mode".
② z Direct button
The function assigned to the direct button is activated.
③ Strap eyelet
④ Earphone microphone terminal
Use for connecting an earphone (commercially available), Kyocera TV
antenna cable 03 (03KYHSA), etc.
⑤ Earphone microphone terminal cover
The opening in the cover is a necessary part of its waterproof construction.
Do not poke with a pointed object or block it.
⑥ In camera (lens)
⑦ Receiver
Hear the other party's voice on call, play sound of answer memo, etc. with
the Smart Sonic Receiver.
⑧ Proximity sensor/Light sensor
Proximity sensor prevents from erroneous operation of touch panel during a
call.
Light sensor detects the ambient light level to adjust the display brightness.
⑨ Incoming (charging) light
Lights in red while charging.
Blinks in green for an arriving call or new mail.
⑩ Display (touch panel)
⑪ C Back button
Return to the previous screen.
⑫ H Home button
Display the Home screen or use for canceling sleep mode. Long-touch to
activate "Google".
⑬ N Recents button
Show recently-used applications.
⑭ Microphone
Transmits your voice to the other party during a call. Or used for recording
the voice sound. Take care not to cover the microphone with your fingers
during a call or recording a video.
- 11 -
Fit back cover to product, then press firmly where shown
from ① to ⑤ making sure there are no gaps all around
back cover
② ①
③ ①
④
②
③
⑤
⑤ ④
②
◎ Be sure to check the au Nano IC Card 04 is certainly attached and then
attach the battery pack.
◎ Improperly attaching parts may damage the battery pack or attaching
the battery cover.
◎ When attaching the battery cover, be careful that the battery pack tab is
not sticking out. May allow water seepage.
◎ To ensure back cover will close, always slide the knob lock to "LOCK" to
firmly lock after closing the battery cover.
- 17 -
Charging
When you purchase your product, the battery pack is not fully charged. Make
sure to charge the battery pack before use. When the charging light in red
turns off, charging is complete.
◎ The product may become warm while charging, depending on the
situation, but this is not abnormal.
◎ A few seconds after charging starts, the time remaining until fully
charged is displayed in the Start screen. This time is intended as a
guide, and should not be taken as an accurate indication.
◎ Charging while using camera etc. may take longer.
◎ When you operate the product with the specified charger (sold
separately) connected, the product may repeat short-time charging/
discharging resulting in short battery life.
◎ When temperature of environment or the product becomes extremely
high or low, charging may be stopped. Try to charge the battery as far as
possible at room temperature.
◎ If the charging light blinks in red, check if the battery pack is correctly
attached or connected. Even if the light keeps blinking, stop charging
and then contact an au shop or Keitai Guarantee Service Center.
◎ Firmly close the external connection terminal cover after charging to
prevent water or dust from getting in. And do not pull strongly or twist the
cover.
◎ If charging is stopped while the charging light is still turned on, the
battery may not be fully charged even with " " (Full) displayed. In that
case, available time will be short.
◎ Do not wirelessly charge when a specified AC adapter (sold separately)
or microUSB Cable 01 (sold separately) are connected. In addition to not
charging properly, malfunction may also result.
◎ Do not allow conductive foreign objects (metal fragments, pencil leads,
etc.) to come into contact with or get inside the connection terminals.
- 23 -