Panasonic NC-ZA1 Operating Instructions Manual page 23

4
Adjust cup filling quantity and/or milk foam as desired.
• If adjustment is unnecessary, move on to the step 6.
• Press or repeatedly to adjust quantity for coffee and/or milk foam. (P. EN13)
(e.g.: Espresso/Coffee)
To start, move on to step 6.
Note
• Only one cup can be prepared with this function.
• If is pressed, the display will return to the select drink menu (step 2). At same time the Espresso machine release
the coffee powder into the waste container. Refill the powder coffee at step 3.
5
Adjust coffee and milk ratio.
(
e.g.: Cappuccino
60% : 40% = milk : coffee
6
Press
(e.g.: Espresso/Coffee)
O When brewing is completed, display will return to the main menu.
Wait until display shows the main menu to remove the cup(s).
Q To turn off the power after use « P. EN25
)
to start brewing.
(e.g.: Cappuccino)
(e.g.: Cappuccino/Latte Macchiato)
To adjust coffee and milk ratio, To adjust coffee and milk ratio,
press and move on to step 5.
Note
• When "Latte Macchiato" is selected, the cup filling quantity will be
displayed as 80% and 20%.
• If is pressed, the display will return to the select drink menu.
Note
• If is pressed during the brewing process, it
immediately stops the process.
After flashes, the display will return to the main menu.
EN23