Channel Master 4228HD Instruction Sheet

ClJasse! Mas/er®
byPCT
Instruction Sheet
Model 4228HD
WARNING: Installation of this product near power lines is DANGEROUS!
For your safety, read the enclosed "DANGER" booklet before beginning your installation.
Front Sections
MODEL 4228HD BASIC ASSEMBLY AND MOUNTING
1. Identify the direction of the desired TV stations transmitter by using www.antennaweb.org.
2. Fold out the 2 front sections of the antenna making sure to fold out the right and left sections
simultaneously so not to put stress onto the phasing harness. Make sure that the front
sections are straight and parallel with respect to the reflector grid and securely tighten the
8 wingnuts (See Fig 1).
3. Attach the mounting hardware to the antenna as shown in Fig 2.
4. Mount antenna to mast as shown.
5. Connect coaxial cable to antenna cable connection port. Secure cable to the mast with a
cable tie to prevent strain on the cable connector.
6. Point the front of the antenna toward the TV transmitter location and adjust for best reception.
Note: The front of the antenna is the side with the X shaped elements.
7. Tighten all loose hardware.
Get the Clearest Picture and Sound
lM
",.
~ ~
RECEPTION & CONNECTIVITY
•
~
CONSUMER & PROFESSIONAL
DID
PRODUCTS
._oIPCT'"",,""IlonaI. ..,
www.channelmasterintl.com
Wingnuts
Cable
Connection
Port
Wingnuts
U-bolt must be secured with bolts thru antenna.
Included Hardware
Channel Master by PCT 2151 East Broadway Road, Ste 211
I
Tempe, AZ 85282-19331 USA Tel +1.480.813.0925
I
Fax +1.480.545.1080
© 2008 Channel Master by PCT a division of PCT International, Inc. RCCPP and Channel Master are trademarks of PCT International, Inc. Channel Master trademark is used under license. Specifications subject to change.
All rights reserved. Pub PCTCM.4228HD.INST.20080811