Panasonic KX-TDA600 Feature Manual page 291

Hybrid ip-pbx
Hide thumbs Also See for KX-TDA600:
Table of Contents

Advertisement

messages finish playing. This is because a reorder tone cannot be detected from an analog line while
playing voice messages.
The first digit of the Walking COS feature number must be entered before the greeting message finishes
playing.
When accessing SVM from a CO line, it is possible to change message boxes (e.g., to leave a message
in another user's message box after listening to one's own messages). However, a user can only access
the message boxes of other extensions assigned to the same SVM/ESVM card. For example, if the user
accesses a message box belonging to SVM/ESVM card 1 first, then the user can only access the
message boxes of other extensions belonging to SVM/ESVM card 1. If the user tries to access the
message box of another extension belonging to a different card, the user will hear a reorder tone.
While a reorder tone is heard, it is possible to retry another call by pressing " ".
Installation Manual References
KX-TDA50
2.5.4 SVM2 Card (KX-TDA5192)
KX-TDA100/KX-TDA200
None
KX-TDA600
2.8.5 ESVM4 Card (KX-TDA0194)
Programming References
PC Programming Manual
2.5.4 Tool—Simplified Voice Message—Delete All Recording
2.5.5 Tool—Simplified Voice Message—Check Current Usage
2.8.25 [1-1] Slot—Card Property - OPB3 (KX-TDA100/KX-TDA200/KX-TDA600 only)—SVM Feature
2.9.4 [2-3] Timers & Counters—Miscellaneous
→ SVM—Recording Time
→ SVM—Dial Tone Continuous Time
2.9.8 [2-6-1] Numbering Plan—Main—Features—Simplified Voice Message Access
2.10.1 [3-1-1] Trunk Group—TRG Settings—Tone Detection
→ Simplified Voice Message Tone Detection—Silence
→ Simplified Voice Message Tone Detection—Continuous
→ Simplified Voice Message Tone Detection—Cyclic
2.11.1 [4-1-1] Wired Extension—Extension Settings—Option 6—Display Lock / SVM Lock
2.11.9 [4-1-7] Wired Extension—Simplified Voice Message
2.11.10 [4-2-1] Portable Station—Extension Settings—Option 6—SVM Lock
2.11.16 [4-2-5] Portable Station—Simplified Voice Message
2.12.5 [5-3-3] Voice Message—SVM
PT Programming Manual
None
Feature Manual References
1.4.3 Dial Tone
1.12.2 OGM (Outgoing Message)
1.16 S
Feature Manual
291

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tda200Kx-tda50Kx-tda100

Table of Contents