Sony BVM-X300 Operating Instructions Manual page 25

Submenu Setting
[1080I/PsF] Set how to display when 50I, 59.94I,
60I, 25PsF, 29.97PsF, or 30PsF signals
are input in the SDI 2K input.
23.98 Hz and 24 Hz signals are
processed as the PsF signal.
[Auto]: When Payload ID is added to

SDI signals, they are processed
based on the ID data. They are
processed as the interlace signals
without the Payload ID.
[PsF]: Processes as the PsF signal.

[Interlace]: Processes as the interlace

signal.
[RGB Range] Select from the following when [Signal
Format] is set to RGB.
[Full]

[Limited]

[SDI Full Range]

1) This manual regards the Full Range
signals that are scaled to the
quantized value except the inhibit
code on the SDI standard as the SDI
Full Range.
[Color Space] Select the color space from the
following:
[ITU-R BT.709]

[EBU]

[SMPTE-C]

[Native]

[S-Gamut/S-Gamut3]

[S-Gamut3.Cine]

[DCI-P3]

[ITU-R BT.2020]

[EOTF] Select the gamma from the following:
[2.2]

[2.4]

[2.6]

[CRT]

[2.4(HDR)]

[S-Log3(HDR)]

[S-Log2(HDR)]

[SMPTE ST.2084(HDR)]

Note
The HDR display is a method to
faithfully display the brightness of
signals defined of 100% or more level
without compressing the brightness
parts.
In the HDR display, the cooling fan

is forcibly rotated regardless of
outside temperature.
In the HDR display, the screen saver

is forcibly set. [Off] cannot be
selected.
In the HDR display, [Flicker Free]

cannot be selected. [On] is always set
for signals of vertical frequency 24
Hz, 25 Hz, 48 Hz, and 50 Hz. [Off] is
always set for signals of 30 Hz and 60
Hz.
Submenu
1)
[Input Setting Skip]
Setting
The protective function for the

OLED panel activates and inserts the
black level in one field according to
the input signal.
When the signal to display high
brightness images on the larger part
of the screen is input, blinking may
occur due to the protection function.
This is not a malfunction. There is
no effect on the throughout.
Using the unit with the high

brightness display for extended
periods may cause eyestrain or
reduction of eyesight. Be sure to take
an occasional break when using.
Follow RECOMMENDATION ITU-

R BT.1702 "Guidance for the
reduction of photosensitive epileptic
seizures caused by television" or
other guidelines to use.
In the HDR display, the display

surface may emit heat when high
brightness images are output. Do not
touch the surface.
Do not display static images that

contains high brightness display,
time codes, markers, or logos for
extended periods to reduce the risk
of burn-in. Consider to apply a
displaying method with a low level
signals of 100% or less.
If a high level signal is continuously

displayed on the same area in the
HDR display, the protection
function activates wherein the
brightness of the bright part in the
display decreases to control the rise
of the surface temperature of the
OLED panel. When the level of the
bright part decreases or the change
of its position continues, the
protection function is deactivated.
However, it may take a while to
deactivate.
In that case, operating the buttons
on the front panel deactivates the
protection function immediately.
[Transfer Matrix] Select the transfer matrix from the
following:
[ITU-R BT.709]

[ITU-R BT.2020]

Sets the skip setting when changing the
input setting by pressing the SDI 2K
button. Select [Skip]/[Not Skip] for
each input setting of [Input Setting1] to
[Input Setting4].
[Skip]: Skips.

[Not Skip]: Does not skip.

25
Adjustment Using the Menus