On/Off Switch – This three-position slide switch is used to
turn the pager on and off, acts as a master reset button,
and activates the backlight.
Alert Lamp – Flashes to give a visual indication when a
message is received.
TURNING THE PAGER ON
SILENT Mode: Slide the On/Off Switch in an upward direc-
$
tion to the SILENT symbol (
). The pager vibrates (if
equipped) and the lamp flashes for 4 seconds.
ON Mode: Slide the On/Off Switch in an upward direction
#
to the ON symbol (
). The pager emits an interrupted beep
and the lamp flashes for 4 seconds.
A full-segment display accompanies the power-up alert.
888888888888
The display then changes to the standby screen.
8:59a
Standby Screen in SILENT Mode
D
8:59a
Standby Screen in ON Mode
3