Related Manuals for Mitox LS45
Summary of Contents for Mitox LS45
- Page 1 Operator’s Manual user manual, maintenance instructions and spare parts LS45 / LS55 / LS55x Electric Logsplitter Read this manual carefully before operating the machine Original Instructions Version October 12...
-
Page 2: Safety Warnings & Cautions
LS45 / LS55 / LS55x Electric Logsplitter SAFETY WARNINGS & EXPLANATION OF SYMBOLS ON THE MACHINE UNDERSTAND YOUR LOG SPLITTER Read and understand the owner’s manual and labels affixed to the log splitter. Learn its application and limitations as well as the specific potential hazards peculiar to it. - Page 3 Don’t leave the tool until it has come to a complete stop. DISCONNECT POWER Unplug the log splitter when not in use, before making adjustments, changing parts, cleaning or working on the log splitter. Consult your local Mitox dealer before servicing. Original Instructions Version October 12...
-
Page 4: Table Of Contents
LS45 / LS55 / LS55x Electric Logsplitter PROTECT THE ENVIRONMENT Take used oil to an authorized collection point or follow the stipulations in the country where the log splitter is used. Do not discharge into drains, soil or water. MAINTAIN YOUR LOG SPLITTER WITH CARE Always clean the unit after each use. -
Page 5: Description Of Product And Application Conditions
LS45 / LS55 / LS55x Electric Logsplitter DESCRIPTION OF MACHINE The log splitter is designed to be used in a domestic application. The log splitter is designed exclusively for the following applications: -Splitting freshly cut timber that does not exceed the dimensions specified in the technical data. -
Page 6: Set Up And Preparation For Operation
LS45 / LS55 / LS55x Electric Logsplitter SET UP AND PREPARATION FOR OPERATION 1. Bolt the Support Leg to the Log Splitter, lift the log splitter by the handles at both ends and place it on a 60 - 75cm high, stable, flat and level work surface, or on the optional work stand. -
Page 7: Log Splitter Operation
LS45 / LS55 / LS55x Electric Logsplitter Do not attempt to split seasoned logs. Green logs split much more easily, and will not put undue pressure on the splitter. Seasoned logs can also split violently, which can be dangerous to the operator. -
Page 8: Replacing Hydraulic Oil
LS45 / LS55 / LS55x Electric Logsplitter QUICKSPLIT STROKE LIMITATION You can limit the length of the splitting stroke, for example when splitting shorter lengths of wood. To use the stroke limiter: Loosen the stroke limiting screw (16). Position a piece of timber on the splitting table against the splitting wedge. -
Page 9: Troubleshooting
LS45 / LS55 / LS55x Electric Logsplitter TROUBLESHOOTING PROBLEM PROBABLE CAUSE REMEDY SUGGESTED Fails to split logs Log is improperly positioned Refer to" Log Splitter Operation" section for perfect log loading The size or hardness of the log exceeds Reduce the log size before splitting it on... -
Page 10: Optional Workstand Assembly
LS45 / LS55 / LS55x Electric Logsplitter OPTIONAL WORK STAND ASSEMBLY Original Instructions Version October 12... -
Page 11: Parts Schematic
LS45 / LS55 / LS55x Electric Logsplitter Original Instructions Version October 12... -
Page 12: Original Instructions Version October
LS45 / LS55 / LS55x Electric Logsplitter PART No DESCRIPTION LS45 LS55 LS55X MILS45-01 LEVER NUT MILS45-02 NUT CAP MILS45-03 LEVER MILS45-04 LEVER KNOB MILS45-05 GUARD PLATE MILS45-06 MILS45-07 COPPER GASKET MILS45-08 SCREW MILS45-09 O-RING MILS45-10 SNAP WASHER – SHAFT... - Page 13 LS45 / LS55 / LS55x Electric Logsplitter PART No DESCRIPTION LS45 LS55 LS55X MILS45-46 PRESSURE LIMIT VALVE SPRING MILS45-47 ADJUSTING SCREW MILS45-48 LOG PUSHER SUPPORT MILS45-49 PLASTIC INSERT (1) MILS45-50 PLASTIC INSERT (2) MILS45-51 LOG PUSHER MILS45-52 MILS45-53 FLAT WASHER...
- Page 14 LS45 / LS55 / LS55x Electric Logsplitter PART No DESCRIPTION LS45 LS55 LS55X MILS45-90 CLAMP MILS45-91 SCREW MILS45-92 SWITCH BOX COVER MILS45-93 SEAL MILS45-94 SWITCH MILS45-95 WIRING BLOCK MILS45-96 CAPACITOR MILS45-97 SWITCH BOX MILS45-98 SEAL MILS45-99 MOTOR SUPPORT (L/H) MILS45-100...
- Page 15 LS45 / LS55 / LS55x Electric Logsplitter Original Instructions Version October 12...
-
Page 16: Declaration Of Conformity
LS45 / LS55 / LS55x Electric Logsplitter EC Declaration of Conformity We herewith declare that the following machine complies with the appropriate basic safety and health requirements of the EC Directive based on its design and type, as brought into circulation by us. - Page 17 LS45 / LS55 / LS55x Electric Logsplitter EC Declaration of Conformity We herewith declare that the following machine complies with the appropriate basic safety and health requirements of the EC Directive based on its design and type, as brought into circulation by us.
- Page 18 LS45 / LS55 / LS55x Electric Logsplitter Original Instructions Version October 12...
- Page 19 LS45 / LS55 / LS55x Electric Logsplitter For more information on the Mitox® range of garden products please visit our website: www.mitoxgm.co.uk Original Instructions Version October 12...
- Page 20 The manufacturer undertakes to replace any spare parts that are classified as defective by an appointed Mitox service dealer. The manufacturer will not accept liability for the replacement of the machine, either partially or wholly, and/or consequential damages, and/or interest charges either directly or indirectly.
Need help?
Do you have a question about the LS45 and is the answer not in the manual?
Questions and answers