Table of Contents
Advertisement
4. Unit installation
Attach the unit to the metal control panel box using M4 screws as shown in Fig. 3-2.
CAUTION
The unit should be attached on all four corners to prevent it falling down.
4
Wiring
WARNING
• All electric work must be performed according to local regulations.
Improper electrical work may result in electric shock or fire.
• Be sure to shut off the power source of this unit and all other connected units before wiring.
CAUTION
Do not connect the AC power line to the M-NET and POWER (24VDC) terminal blocks of this device; otherwise, the unit may fail.
1. Cover Removal and Installation
Remove the three mounting screws and the cover.
Attach the corner to the unit by tightening the three screws indicated in Figure 4-1.
M4 (accessories)
Fig. 3-2
Fig. 4-1
- 5 -
M4 (field-supplied)
Refer to the AG-150A Installation
Manual for instructions on how to
install the unit inside the mounting
attachment A type (PAC-YG85KTB)
(sold separately).
- Quick Links:
- Specifications
- Product Features
Hide quick links:
Advertisement
Table of Contents
