Motorola RFS6000 Configuration Manual page 10

10
When SpectraLink Wireless Telephones are configured for
802.11a mode:
RFS6000>en
RFS6000#conf t
RFS6000 (config)#wireless
RFS6000 (config-wireless)#country-code us
RFS6000 (config-wireless)#radio add 2 00-A0-F8-CD-ED-EC
11a ap300
RFS6000 (config-wireless)#radio 2 beacon-interval 100
RFS6000 (config-wireless)#radio 2 dtim-period 3
RFS6000 (config-wireless)#radio 2 bss 1 1
RFS6000 (config-wireless)#radio 2 speed basic6 9 basic12
18 basic24 36 48 54
Channel selection
You can specify the desired channel manually by using the following
commands.
For 802.11b/g radio:
RFS6000(config-wireless)#radio 1 channel-power indoor 11
20
For 802.11a radio:
RFS6000(config-wireless)#radio 2 channel-power indoor 36
17
For configuring power and data rate settings
facility's RF site survey, designed for voice traffic, to determine if you
have sufficient coverage to support all data rates. SpectraLink
Wireless Telephones require the following minimum dBm reading to
support the corresponding
802.11
Radio Standard Signal Strength (RSSI)
802.11b
802.11g
802.11a
For additional details on RF deployment please see the
Enterprise-Grade Wi-Fi Telephony
Practices Guide for Deploying SpectraLink 8020/8030 Wireless
Telephones.
,
data rate setting in the access point.
Basic
Minimum Available
-70 dBm
-60 dBm
-63 dBm
-47 dBm
-60 dBm
-45 dBm
white paper and the
Configuration Guide
please consult your
Maximum
"Basic" Data Rate
1 Mb/s
11 Mb/s
6 Mb/s
54 Mb/s
6 Mb/s
54 Mb/s
Deploying
Best
PN: 1725-36197-001_A.doc