Setting The Clock/Setting And Using The Alarms - iHome iBT29 Instruction Manual

Setting the Clock
1. Press and hold the Time Set/Sleep Button for 2 seconds until the clock display flashes
and a beep sounds.
2. Press the or
Make sure you set the correct AM/PM time. The AM and PM indicators appear to the
left of the display.
3. Press the Time Set/Sleep Button to confirm the time and exit clock setting mode. 2 beeps will confirm
clock setting is complete.
TIP: To toggle the clock display between standard 12 hour time and 24 hour ("military") time display,
press the Alarm 1 Button or Alarm 2 Button while the display is flashing during clock setting.
Setting and Using the Alarms
This unit features dual alarms which can be set to different times and alarm sources. Each is set in the
same way. Instructions are given as "Alarm Button"; use Alarm 1 Button or Alarm 2 Button to set
respective alarms.
Note: Each step must be completed while display is flashing or step will time-out with any changes saved.
Buttons to adjust the clock to the current time (hold for rapid setting).
Using the
7
iBT29