Replacing Light Bulbs - Toyota 2007 Avalon Owner's Manual

—Adjusting the vertical aiming
1. Turn the vertical movement adjusting
bolt 1 in either direction using a Phil-
lips−head screwdriver. At this
keep the turning direction and number
of turns in mind.
2. Turn the vertical movement adjusting
bolt 2 the same number of turns and
time, in the same direction as step 1 using
a Phillips−head screwdriver.
'06 AVALON_U (OM41418U)

Replacing light bulbs—

The following illustrations show how to
gain access to the bulbs. When replacing
a bulb, make sure the ignition switch and
light switch are off. Use bulbs with the
wattage ratings given in the table.
The high mounted stoplight consists of a
number of LEDs. If any of the LEDs burn
out, take your vehicle to your Toyota deal-
er to have the light replaced.
CAUTION
D
To prevent burning yourself, do not
replace the light bulbs while they
are hot.
D
Halogen bulbs have pressurized gas
inside and require special handling.
They can
scratched or dropped. Hold a bulb
only by its plastic or metal case.
Do not touch the glass part of a
bulb with bare hands.
burst or shatter if
377