Wireless Relay Box (Bdr91) To Control A Boiler; To Bind The Relay Box - Honeywell Evohome Installation Manual

18

Wireless Relay Box (BDR91) to control a boiler

evohome
Controller
If you are NOT
following GUIDED
CONFIGURATION
follow these steps
on your evohome
Controller display first:
1. Press and hold
'Settings' for 3
seconds
2. Press the green tick
3. Press SYSTEM
DEVICES
4. Press BOILER
CONTROL
5. Press BOILER RELAY
Step 3: Power up and bind devices
Power up and bind a Wireless Relay Box
(BDR91) to control a boiler
Make sure the Wireless Relay Box (BDR91) is wired
to the boiler and powered up.

To bind the Relay Box

Press and hold the button for 15 seconds (until the red
1
LED blinks rapidly) to clear any previous binding data
Press and hold the button again for 5 seconds
2
(until the red LED blinks slowly)
On the evohome Controller press
3
the green bind button
You should receive a SUCCESS message on the
4
evohome Controller (if not go back and re-bind)
1 2
PRESS
AND HOLD
15 SEC
PRESS
AND HOLD
5 SEC