Datalogic Skorpio X3 User Manual
  1. Manuals
  2. Brands
  3. Datalogic Manuals
  4. Handhelds
  5. Skorpio X3
  6. User manual

Datalogic Skorpio X3 User Manual

Hide thumbs Also See for Skorpio X3:
Table of Contents

Advertisement

Quick Links

See also: User Manual
Skorpio™ X3
Mobile Computer
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Skorpio X3 and is the answer not in the manual?

Questions and answers

Related Manuals for Datalogic Skorpio X3

Summary of Contents for Datalogic Skorpio X3

  • Page 1 Skorpio™ X3 Mobile Computer User’s Manual...
  • Page 2 Datalogic ADC, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic ADC”). Owners of Datalogic products are hereby granted a non- exclusive, revocable license to reproduce and transmit this documentation for the purchaser' s own internal business purposes.

  • Page 3: Table Of Contents

    Alphanumeric Keyboard (38 Keys) ............. 42 4.4.3 Numeric Keyboard (28 Keys) ..............44 4.4.4 Inserting the Terminal Emulation Overlay ........... 47 4.4.5 Resetting the Skorpio X3 ................48 Status Indicators ..................50 4.5.1 LED Status ....................50 4.5.2 Taskbar ....................... 51...
  • Page 4 Connecting to Other Computers ..............77 4.7.1 Windows Mobile® Device Center ..............77 4.7.2 Bluetooth® Manager Device Setup ............. 79 Datalogic Firmware Utility ................87 4.8.1 Retrieving a Firmware Image Update ............87 4.8.2 Installing DFU on the Host PC ..............88 4.8.3...
  • Page 5 RF Exposure Information (SAR) ............... 144 Industry Canada Compliance ..............145 SAR Compliance ..................145 WEEE Compliance ................... 146 GLOSSARY ....................148 INDEX ....................... 152...

  • Page 6: References

    “Mobile computer” and "Skorpio X3" refer to Skorpio X3 mobile computer. “You” refers to the System Administrator or Technical Support person using this manual to install, configure, operate, maintain or troubleshoot a Skorpio X3 mobile computer. “Single Dock” refers to the Skorpio X3 Single Slot Dock.

  • Page 7: General View

    GENERAL VIEW A) Color Display* G) Laser Safety Label B) ON/OFF Power Key H) Loudspeaker C) LEDs Micro USB Charging Port (Power Only) D) Receiver speaker Product Label E) Front Scan Key K) Reset Key (under battery) Keyboard MicroSD Card Slot (under battery) M) Trigger button (for use with the optional pistol trigger ∗...
  • Page 8 N) Data Capture Window O) HandyLink™ Connector (host/device) viii...

  • Page 9: Introduction

    The Skorpio X3 pistol grip version takes advantage of the best handle and trigger in the warehouse industry. Compact size and light weight combine to offer excellent balance, and superior handling.

  • Page 10: Available Models

    SKORPIO™ X3 AVAILABLE MODELS The Skorpio X3 is available in different models depending on the options it is equipped with. All options are listed below: • communication options: 802.11 a/b/g radio, Bluetooth® • data capture options: laser, 2D imager •...
  • Page 11 INTRODUCTION • 942350011 SKORPIOX3 00A0LS-2S0-CEU0 Skorpio X3 with Bluetooth v2.0, 802.11 a/b/g CCX V4, Hand Held, Std Laser w/ Green Spot, Windows CE 6.0, 256MB RAM/512MB Flash, 38-Key Alphanumeric • 942350024 SKORPIOX3 00A0WI-2N0-CEU0 Skorpio X3 Hand held, 802.11 a/b/g CCX v4, Bluetooth v2, 256MB RAM/512MB Flash, 28-Key Numeric, Std range imager w Green Spot, Windows CE 6.0...
  • Page 12 SKORPIO™ X3 • 942400001 SKORPIOX3 00A0LS-3N0-CEU1 Skorpio X3 with Bluetooth v2.0, 802.11 a/b/g CCX V4, Pistol Grip, Std Laser w/ Green Spot, Windows CE 6.0, 256MB RAM/512MB Flash, 28-Key Numeric, Terminal Emulation • 942400002 SKORPIOX3 00A0LS-3F0-CEU1 Skorpio X3 with Bluetooth v2.0, 802.11 a/b/g CCX V4, Pistol Grip, Std Laser w/ Green Spot, Windows CE 6.0, 256MB RAM/512MB Flash, 50-Key Full-...
  • Page 13 INTRODUCTION • 942400017 SKORPIOX3 00A0HL-3N0-CEU1 Skorpio X3 Pistol grip, 802.11 a/b/g CCX v4, Bluetooth v2, 256MB RAM/512MB Flash, 28-Key Numeric, White illumination 2D engine w/Green Spot, Windows CE 6.0, Extended Battery • 942400018 SKORPIOX3 00A0HL-3S0-CEU1 Skorpio X3 Pistol grip, 802.11 a/b/g CCX v4, Bluetooth v2, 256MB RAM/512MB Flash, 38-Key Alphanumeric, White illumination 2D engine w/Green Spot, Windows CE 6.0, Extended Battery...

  • Page 14: Package Contents

    1 Wavelink Avalanche Insert − 1 End User License Agreement (EULA) Sheet Any other packages will contain the accessories necessary for the Skorpio X3 connection to the host computer and to the network: the cradle, one or more connection cables.
  • Page 15 INTRODUCTION Rechargeable battery packs are not initially fully charged. Therefore the first operation to perform is to charge them. See section 2.1. NOTE...

  • Page 16: Inserting A Microsd Card

    SKORPIO™ X3 INSERTING A MICROSD CARD The Skorpio X3 supports microSD memory cards. To access the microSD card slot and insert the card, proceed as follows: Turn off the Skorpio X3. Pull the battery latch down and remove the battery pack:...
  • Page 17 INTRODUCTION Insert the microSD card with the written part upward: Lock the card into place by pushing the cardholder down and then shifting it downwards: Insert the battery's alignment lugs into the recesses, then press firmly until the battery latch clicks twice.

  • Page 18: Removing The Microsd Card

    Skorpio X3 or the microSD card itself. Proper ESD precautions include, but are not limited to, working on CAUTION an ESD mat and ensuring that the operator is properly grounded. Do not force the card. If you feel resistance, remove the card, check the orientation, and reinsert it.

  • Page 19: Accessories

    INTRODUCTION ACCESSORIES  Cradles 94A150031 Dock, Single Slot, Skorpio X3 94A150032 Charger, 4 Slot Dock, Skorpio X3 94A150034 Charger, 4 Slot Battery, Skorpio X3 94A150041 Vehicle Holder, Skorpio X3 94A150055 Dock, Ethernet 4 Slot, Skorpio X3  Batteries 94ACC0046 Battery, High Capacity, Skorpio X3 94ACC0048 Battery, Standard Capacity, Skorpio X3 ...
  • Page 20 SKORPIO™ X3 Use only a Datalogic-approved power supply and cables. Use of an alternative power supply will invalidate any approval given to this device and may be dangerous. NOTE...

  • Page 21: Batteries And Maintenance

    Skorpio X3 Micro-USB charging port. The Micro-USB port can also be used to charge the Skorpio X3 battery pack from any self-powered USB hub or USB port on a computer, but only when the Skorpio is suspended.
  • Page 22 The charging LED will flash red when a charging error is detected (see par. 4.5.1). The stand alone battery pack may be recharged outside a Skorpio X3 using the spare battery charging slot on the back of a single slot dock, an Ethernet four slot dock, or a four slot battery charger.
  • Page 23 Never charge the main device or spare batteries in a closed space where excessive heat can build up. The battery level may display incorrectly for several minutes after the Skorpio X3 is disconnected from its charger if the charging cycle is not completed. NOTE The Skorpio X3 may get warm during charging;...

  • Page 24: Replacing The Battery Pack

    SKORPIO™ X3 REPLACING THE BATTERY PACK To correctly replace the battery pack, proceed as follows. Turn off the Skorpio X3. Pull the battery latch down as indicated in the figure below: Remove the battery pack.
  • Page 25 Using the battery pack in this manner may also result in a loss of performance and a shortened life expectancy. Use only a Datalogic approved power supply. The use of an alternative power supply will void the product warranty, may cause product damage and may cause heat, an explosion, or fire.
  • Page 26 SKORPIO™ X3 Immediately discontinue use of the battery pack if, while using, charging or storing the battery pack, the battery pack emits an unusual smell, feels hot, changes colour or shape, or appears abnormal in any other way. WARNING Do not short-circuit the battery pack contacts connecting the positive terminal and negative terminal.
  • Page 27 In this case, either substitute a sufficiently charged battery, insert NOTE the Skorpio X3 into a powered cradle, or plug it into a wall charger. To maximize battery life, turn off radios when they are not needed.

  • Page 28: Cleaning The Mobile Computer

    SKORPIO™ X3 CLEANING THE MOBILE COMPUTER Periodically clean the Skorpio X3 with a slightly dampened cloth. Do not use alcohol, corrosive products or solvents. 2.3.1 Dock Contacts Cleaning Procedure All exterior metal contacts/connectors exposed to spills, dirt or debris accumulation require periodic cleaning to ensure best performance during charging and data transmission.
  • Page 29 BATTERIES AND MAINTENANCE Cleaning the Dock Contacts Remove the power cable before cleaning the contacts. Use a soft dry cloth as suggested above. If the product is very dirty, moisten the cloth in a non-aggressive cleaning solution or diluted isopropyl alcohol solution (20% maximum).
  • Page 30 SKORPIO™ X3 Cleaning the Dock Auxiliary Battery Contacts Remove the power cable and the Ethernet module before cleaning the contacts. Use a soft dry cloth as suggested above. If the product is very dirty, moisten the cloth in a non-aggressive cleaning solution or diluted isopropyl alcohol solution (20% maximum).

  • Page 31: Connections

    CONNECTIONS CONNECTIONS USB CONNECTION You can use the Datalogic HandyLink cable 94A051970 to directly connect the Skorpio X3 to a host computer to transfer data through the USB interface. Key: Host computer Skorpio X3 94A051970 HandyLink USB Client Cable The HandyLink cable complies to the USB 1.1 standard.
  • Page 32 SKORPIO™ X3 The Single Dock can be connected to the host computer by means of the Micro-B USB cord 94A051968. Once the host computer has been turned on, insert the Skorpio X3 mobile computer into the cradle. Key: Host computer...

  • Page 33: Connection To Usb Peripherals

    CONNECTIONS CONNECTION TO USB PERIPHERALS You can connect the Skorpio X3 to a standard 101-key USB keyboard or to a standard USB flash memory device. Connect the terminal to the Datalogic 94A051971 HandyLink Micro-USB host cable. For all these devices maximum current draw must be less than 100mA.
  • Page 34 SKORPIO™ X3 Connect the Single Slot Dock to the peripheral by means of a Micro-A USB cord, or use a Micro-A to Std-A receptacle USB adapter such as Datalogic 94A051969 (together with a standard USB cable if needed). ∗ USB Peripheral (memory)

  • Page 35: Rs232 Connection

    CONNECTIONS RS232 CONNECTION You can use the Datalogic 94A051972 cable to directly connect the Skorpio X3 to a host computer to transfer data through the RS232 interface Key: Host computer Skorpio X3 94A051972 HandyLink Micro RS232 Client Cable The Single Slot Dock can be connected to the Host by means of a standard null modem cable such as Datalogic 94A051020 CAB-427 for 9-pin connections.

  • Page 36: Wlan Connection

    SKORPIO™ X3 WLAN CONNECTION Skorpio X3 802.11 a/b/g radio models can communicate with the host using the on- board Wi-Fi radio and an Access Point connected to a network. For models using the 802.11 a/b/g radio, you can find information about the applet for radio configuration: http://www.summitdata.com/SCU.htm.
  • Page 37 (microwave ovens, radio transmitters, etc.). NOTE In case of heavy usage the Skorpio X3 may get warm; this is normal and does not mean a malfunction. NOTE...

  • Page 38: Wpan Connections

    SKORPIO™ X3 WPAN CONNECTIONS Datalogic Skorpio X3 Bluetooth® models can communicate with a Bluetooth® device, such as a printer, within a range of 10 m, using the on-board Bluetooth® module. Key: A) Skorpio X3 B) Bluetooth® printer In order to extend battery life, the Bluetooth® module is off by default.

  • Page 39: Wireless And Radio Frequencies Warnings

    Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications or attachments could damage the product and may violate laws and regulations. The antennas inside the Skorpio X3 are not user-accessible and cannot be replaced by end users. Send any faulty equipment to Datalogic WARNING for repair.
  • Page 40 SKORPIO™ X3 Turn this device OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may use equipment that could be sensitive to external RF energy. WARNING RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles.

  • Page 41: Use And Functioning

    STARTUP The Skorpio X3 turns on when the battery pack or the external supply is inserted and the ON/OFF Power button is pressed. After the battery pack is installed, use the [ON/OFF] key to turn the mobile computer on and off.

  • Page 42: Using The Stylus

    To recalibrate the touch screen use the Screen applet (see par. 4.6.7). Use only original Datalogic styluses supplied with the product itself. In harsh applications, use of screen protectors should be taken into consideration, in order to extend the touch screen operating life.

  • Page 43: Windows Embedded Handheld Welcome Wizard

    USE AND FUNCTIONING WINDOWS EMBEDDED HANDHELD WELCOME WIZARD In Windows Embedded Handheld, at the very first Skorpio X3 startup, following a clean boot or following a Registry restore to default values, the mobile computer startup (see par. 4.1) is preceded by the Welcome Wizard.

  • Page 44: Data Capture

    SKORPIO™ X3 DATA CAPTURE To capture data first of all tap Start > Settings > System > Decoding: To configure and enable data capture parameters refer to par. 4.6.1.

  • Page 45: Laser Data Capture

    4.3.1 Laser Data Capture To scan barcodes, point the Skorpio X3 laser model onto the code from a distance within the reading range while pressing the SCAN key or the pistol trigger. The lighted band emitted by the laser must completely cross the barcode as shown in the figure below.

  • Page 46: Imager Data Capture

    To read a 1D or 2D code, simply point the Skorpio X3 Imager model onto the code and press the SCAN Key or the pistol trigger.
  • Page 47 The field of view changes its size as you move the reader closer or farther away from the code. The field of view indicated by the aiming system pattern will be smaller when the Skorpio X3 Imager is closer to the code and larger when it is farther from the code.

  • Page 48: Description Of The Keyboards

    SKORPIO™ X3 DESCRIPTION OF THE KEYBOARDS The Skorpio X3 comes with three different keyboards: a full-alphanumeric keyboard, having 50 keys, an alphanumeric keyboard, having 38 keys and a numeric keyboard, having 28 keys. 4.4.1 Full-alphanumeric Keyboard (50 Keys)
  • Page 49 Blue modifier (one shot key): when pressed before a standard key, it enables the character or function printed in blue above the key The ON/OFF Power button powers the Skorpio X3 ON or OFF. It is placed on the upper left side of the terminal.

  • Page 50: Alphanumeric Keyboard (38 Keys)

    SKORPIO™ X3 4.4.2 Alphanumeric Keyboard (38 Keys)
  • Page 51 Blue modifier (one shot key): when pressed before a standard key, it enables the character or function printed in blue above the key The ON/OFF Power button powers the Skorpio X3 ON or OFF. It is placed on the upper left side of the terminal.

  • Page 52: Numeric Keyboard (28 Keys)

    SKORPIO™ X3 4.4.3 Numeric Keyboard (28 Keys)
  • Page 53 Blue modifier (one shot key): when pressed before a standard key, it enables the character or function printed in blue above the key The ON/OFF Power button powers the Skorpio X3 ON or OFF. It is placed on the upper left side of the terminal.
  • Page 54 SKORPIO™ X3 Multitap Function In the numeric keypad the number keys (key 0 excluded) and the ESC key share the following behavior scheme: Function of the key when directly pressed. Modified by the Yellow key, repeated presses cycle through the letters shown on the keyboard overlay for each key.

  • Page 55: Inserting The Terminal Emulation Overlay

    USE AND FUNCTIONING 4.4.4 Inserting the Terminal Emulation Overlay To insert the terminal emulation overlay, proceed as follows: ∗ Remove the overlay using a torx screwdriver: Insert the terminal emulation overlay (first the upper side): Fix the overlay with the screwdriver: ∗...

  • Page 56: Resetting The Skorpio X3

    RAM, but the file system is preserved. The Registry is restored from persistent memory. A clean boot restores the Skorpio X3 to a clean configuration: both the Registry and the file system returns to a clean status that conforms to factory default.
  • Page 57 USE AND FUNCTIONING Clean Boot To perform a clean boot, do the following steps: Perform a Cold Boot (see Cold Boot) Press and hold down the ‘Esc’ + ‘0’ keys simultaneously, promptly after resetting: A dialog box will appear asking for confirmation. Press the Enter Key. Warm Boot Cold Boot Clean Boot...

  • Page 58: Status Indicators

    SKORPIO™ X3 STATUS INDICATORS 4.5.1 LED Status The Skorpio X3 provides three different LEDs signaling the mobile computer status. STATUS Scanning LED is ON from the time the ∗ Good Read user hits the scan button (or trigger) until the bar code is decoded (laser models) (right side) Time-out (imager models).

  • Page 59: Taskbar

    USE AND FUNCTIONING 4.5.2 Taskbar The title bar provides information about the time, the battery level, the keyboard function, and the decoding status. Windows Embedded Handheld Taskbar ICONS DESCRIPTION Zooms the screen. Opens the Connections balloon, which includes hypertext links to the Wireless Manager and the Connections applet.

  • Page 60: Settings

    SKORPIO™ X3 SETTINGS From the Start menu, tap Settings. The settings are organized hierarchically. Control panel applets are displayed as icons; each icon corresponds to one applet: Windows Embedded Handheld Control Panel...

  • Page 61: Data Capture Configuration

    USE AND FUNCTIONING 4.6.1 Data Capture Configuration You can configure the Skorpio X3’s decoding options by tapping Start -> Settings -> System -> Decoding: There are two sections in the Decoding control panel, each containing additional pages. There are seven General Configuration pages and multiple Barcode symbology pages.
  • Page 62 SKORPIO™ X3 Audio From the Decoding menu, tap Configure > General > Audio. Use it to set volume, tone, duration, and number of various types of beeps. Good Read From the Decoding Properties applet, tap Configure > General > Good Read. Use it to enable Good Read indications, the use of Green Spot and a to set the decoding timeout for decoding labels.
  • Page 63 USE AND FUNCTIONING Formatting From the Decoding Properties page, tap Configure > General > Formatting. Use it to configure prefix, suffix and data separator character strings. General Options From the Decoding menu, tap Configure > General > General Options. Select from Label Programming Enable, Symbology IDs and Group Separator Replacement.
  • Page 64 SKORPIO™ X3 Decoding Options From the Decoding Properties applet, tap Configure > General > Decoding Options. Use it to configure the User ID for symbologies, Redundancy and Aggressive Decoding (if supported by the decoding module). Select a symbology to view or change the available properties settings.
  • Page 65 USE AND FUNCTIONING Spot Beam From the Decoding Properties applet, tap Configure > General > Spot Beam. It allows enabling and configuration of Spot Beam and triggering modes. It is only available on devices equipped with laser and advanced long range laser decoding modules that support the Spot Beam Feature.
  • Page 66 SKORPIO™ X3 Imager Options From the Decoding Properties applet, tap Configure > General > Imager Options. It configures illumination, target beam and Pick List mode, and triggering modes. It is only available on devices equipped with 2D decoding engines.
  • Page 67 USE AND FUNCTIONING Devices From the Decoding Properties page, tap Configure > General > Devices. Use it to enable or disable the keyboard wedge for Barcode scanner.
  • Page 68 SKORPIO™ X3 1D Barcode Symbology Pages Use the drop-down menus from Configure > 1D Barcode, or tap the left and right arrow keys to navigate the different pages of the barcode symbology pages. Each barcode symbology opens to its own page, as shown in the figure below. Refer to the sample symbology control panels for examples of the types of fields and options you can modify.
  • Page 69 USE AND FUNCTIONING Decoding Settings Select from the Decoding Properties Settings menu to restore previous configurations and/or other available default settings. Choose from: • Factory Defaults • Minimum Settings • Maximum Settings • Save (New Settings) • Revert to Saved Settings The settings are saved when you tap ‘Yes’.

  • Page 70: Buttons

    SKORPIO™ X3 4.6.2 Buttons From the Start menu, tap Settings > Personal > Buttons. On the Program Buttons tab, customize the program hardware buttons to launch your most used applications. Under ‘Select a button’, tap the button you want to assign a program to, and then select a program from ‘Assign a program’.

  • Page 71: Dl Buttons

    USE AND FUNCTIONING 4.6.3 DL Buttons In Windows Embedded Handheld devices, <F1>-<F10> buttons (excluding F5) are assigned by Windows to default applications. F5 is commonly used by applications to refresh the few, but is not explicitly controlled by default. To disable an assigned function, tap Start > Settings > System > DL Buttons to display the DL Buttons window: Select the button you want to disable.
  • Page 72 SKORPIO™ X3 To add the button, tap ‘New’ and then press the button you wish to add: To assign a new function to the button, select the desired function and then tap ‘OK’: To restore the old settings, do a clean boot...

  • Page 73: Triggers

    USE AND FUNCTIONING 4.6.4 Triggers Triggers are special customizable buttons that are mapped by default by DL Buttons. Also, they can be set as wakeup buttons: TRIGGERS AVAILABLE FUNCTIONS Scan Bar Code function activates the scanner. Pistol Trigger...

  • Page 74: Application Switcher

    SKORPIO™ X3 4.6.5 Application Switcher The application switcher provides the same functionality as the standard Windows® Alt+Tab function. This allows the user to switch between the various open applications. The application switcher can be activated via an assigned shortcut key specified in the “DL Buttons”...

  • Page 75: Wireless Communications

    USE AND FUNCTIONING 4.6.6 Wireless Communications The Wireless Manager application is a sort of 'Control Panel' for wireless connections. From here it is possible to turn on or off Bluetooth® and radio modules. Open the Wireless Manager by tapping Start > Settings > Connections > Wireless Manager, or by tapping the connectivity icon on the taskbar and then tapping the "Wireless Manager"...
  • Page 76 SKORPIO™ X3 Summit Client Utility (SCU) Wireless networking has a customized control, Summit Client Utility (SCU). From the Start menu, tap: Summit > SCU: The SCU will open to the “Main” tab: Summit Client Utility...
  • Page 77 USE AND FUNCTIONING To create a new profile, tap the "Profile" tab: Information about the wireless network can be entered directly in the profile tab or by pressing “Scan” when the desired network SSID is in range. At the "Scan" screen, select the desired SSID:...
  • Page 78 SKORPIO™ X3 Tap the "Configure" button Follow the on-screen instructions to configure security parameters for your network. For more detailed settings specific to your installation please contact your wireless network administrator. When finished, tap “Commit” to save your settings. Return to the “Main” tab, if you have not previously selected “Commit” you will be prompted to save your changes.
  • Page 79 USE AND FUNCTIONING At the “Main” tab select the profile you just created. If you used the “scan” button the desired profile will have the same name as the SSID. Use the “Status” tab to check connectivity to the network. More detailed information about the applet for radio configuration can be found at http://www.summitdata.com/Documents/summit_users_guide_3_03.html.

  • Page 80: Stylus Calibration

    SKORPIO™ X3 4.6.7 Stylus Calibration You might need to recalibrate the touch screen (i.e. when you attempt to select one item with the stylus, another item is erroneously selected). To recalibrate the touch screen, complete the following steps: Select Start > Settings > System > Screen to open the Screen Settings.
  • Page 81 USE AND FUNCTIONING Startup Stylus Calibration When clean booting the terminal, a Welcome Wizard (with Stylus Calibration) comes up if valid calibration settings are not available.

  • Page 82: Audio Settings

    SKORPIO™ X3 4.6.8 Audio Settings There are two applets that control volume: Audio and Volume & Sounds. Audio From the Start Menu, tap Settings > System > Audio: The audio control panel can be used to independently set the playback or recording volume for different types of audio inputs and outputs, such as a headset, powered mobile dock, or the internal speakers and microphone.
  • Page 83 USE AND FUNCTIONING Sounds & Notifications From the Start Menu, tap Settings > Sounds and Notifications: The Sounds & Notifications applet configures audio features of all speakers and headphones: Sounds Tab...
  • Page 84 SKORPIO™ X3 You can also set the volume of a paired Bluetooth® headset. Tap: Start > Settings > System > Bluetooth Manager, select the Connections tab and then select the headset pairing in the Paired Devices list. The following window will appear:...

  • Page 85: Connecting To Other Computers

    USE AND FUNCTIONING CONNECTING TO OTHER COMPUTERS There is more than one way to connect the Skorpio X3 to a host PC running Windows. Each requires specific connections in order to function properly. 4.7.1 Windows Mobile® Device Center The desktop application Windows Mobile® Device Center gives you the ability to synchronize information between a desktop computer and your Skorpio X3.
  • Page 86 SKORPIO™ X3 When a microSD card is inserted, Skorpio X3 allows a mass storage data connection to a host PC. This functionality can be enabled through the Control Panel. When doing so, the microSD card is not available to the Skorpio X3. An ActiveSync connection is not possible NOTE when this feature is enabled.

  • Page 87: Bluetooth® Manager Device Setup

    Search for available Bluetooth® devices by tapping the button for the type of device you want (Printer, Serial or All) or tap the Discovery tab and then tap the Discover button to skip this step. The Skorpio X3 will search for Bluetooth® devices within range.
  • Page 88 SKORPIO™ X3 Once searching is complete, Bluetooth® devices will be displayed in the Discovery tab. You can set up a connection to a device in the list by selecting the device and then tapping the 'Connect' button: To create a pairing: Select a service: Configure any encryption, authentication, or virtual port options required by the service selected.
  • Page 89 USE AND FUNCTIONING Icon Service Dialup Networking Printer Object Push (OPP) or Object Exchange (OBEX) ActiveSync Human Interface Device (HID) - Keyboard Serial Personal Area Network (PAN) Modem Headset Handsfree Virtual Port allows you to specify the incoming port, which is used to communicate serially with an incoming device just as if it were a physical COM port.
  • Page 90 SKORPIO™ X3 You can also select Encrypt or Authenticate from the Bluetooth® control panel to apply or modify those settings. To require Authentication, check the checkbox, then tap OK. If required, the Authentication Request dialog will then open, requesting that you enter a PIN.
  • Page 91 USE AND FUNCTIONING The dialog will also appear when an Authentication request is received from another device. Once you have set up a Pairing, you can view the settings by double-tapping its name in the Connections tab. Tap the arrow to change the Virtual Port, or Delete to remove the device pairing.
  • Page 92 SKORPIO™ X3 Using your device to connect to the Skorpio X3 Before turning on Bluetooth®, ensure that the two devices are within close range and that both Bluetooth® -enabled devices are discoverable. Tap Start > Settings > System > Bluetooth Manager to open the Bluetooth®...
  • Page 93 X3, use the Port control to select a virtual COM port to use for the connection. Tap ‘Find Me’ if you want to make the Skorpio X3 visible to other Bluetooth® devices for 60 seconds, allowing them to set up a connection.
  • Page 94 SKORPIO™ X3 By default, Bluetooth® is turned off. If you turn it on, and then turn off your device, Bluetooth® also turns off. When you turn on your device again, Bluetooth® turns on automatically. NOTE...

  • Page 95: Datalogic Firmware Utility

    For more information refer to the dedicated section of the Wavelink website: http://www.wavelink.com/Datalogic-device-downloads. − If Wavelink Avalanche™ is not available or you have only a few Datalogic devices to update, use the Datalogic Firmware Utility (DFU), described below, to install or update the firmware using an ActiveSync connection.

  • Page 96: Installing Dfu On The Host Pc

    PC. NOTE To install the Datalogic Firmware Utility, complete the following steps on the PC: Go to the Datalogic website and download the most current version of the Datalogic Firmware Utility. Unzip the file, then double-click to run DFU_Setup.

  • Page 97: Updating The Firmware

    ActiveSync or Windows Mobile® Device Center connection between the host computer and the Datalogic device. NOTE Go to Start > Programs > Datalogic > DFU > Datalogic Firmware Utility. WMDC/ Verify that ActiveSync is selected by clicking Communications > ActiveSync.

  • Page 98: Datalogic Configuration Utility

    DATALOGIC CONFIGURATION UTILITY Datalogic Configuration Utility (DCU) is a Datalogic Windows-based utility tool allowing the uploading, modifying and downloading of the configuration of a Datalogic device. Configuration settings include Scanner, Control Panel, and Datalogic Desktop Utility (DDU). The DCU installer is downloadable from the Datalogic website (http://www.datalogic.com/eng/support-services/automatic-data-...

  • Page 99: 4.10 Datalogic Desktop Utility

    USE AND FUNCTIONING 4.10 DATALOGIC DESKTOP UTILITY ® Datalogic Desktop Utility (DDU) allows administrators to configure Windows CE and Embedded Handheld devices to control individual user access. This includes the ability to: • Prevent users from changing your device OS settings.

  • Page 100: Administrative Options (Admin Tab)

    4.10.1 Administrative Options (Admin tab) When you open the DDU control panel, the “Admin” tab appears. COMMAND DESCRIPTION Enable Datalogic Desktop Select/tap this checkbox to activate the DDU functions such as Windows Access Restrictions and Application Selector. Enter Password Enter a password in the text box. This allows the user to specify a password when this utility is launched.

  • Page 101: Setting A Password

    You must select/tap “Set Password” prior to exiting DDU in order to store and activate your new password. It is not necessary to select “Enable Datalogic Desktop”. NOTE If you select/tap “Set Defaults” it will remove all custom settings and restore all the factory default settings, except a previously set password.
  • Page 102 Enter blanks in both “Password” fields. Select/tap “Set Password”. Password Request Dialog Box Once the password is set, the next time you open the “Datalogic Desktop Utility”, the DDU Password dialog box opens. This dialog box will only open if a password was defined.

  • Page 103: Locked Web Browser Options (Lockedweb Tab)

    USE AND FUNCTIONING 4.10.2 Locked Web Browser Options (LockedWeb tab) Tap the LockedWeb tab to access the Locked Web Browser Configuration. Locked Web Browser is disabled by default. To enable, go to “Advanced settings” on the next page for more information. NOTE For additional information about Locked Web Browser commands and metatags, see section 4.12, “Locked Web Browser”.
  • Page 104 SKORPIO™ X3 Error Redirection options Error Type The “Error Type” pull-down list displays available Error Types: (400) Invalid Syntax, (403) Request Forbidden, (404) Object Not Found, (406) No Response Format, (410) Page Doesn't Exist, (500) Internal Server Error, (501) Server Can't Do That, Generic Error, Network Disconnected Error Page Edit this textbox to associate a website or html file with the specified...

  • Page 105: Advanced Settings

    USE AND FUNCTIONING Advanced settings General Tab Context Menu...
  • Page 106 SKORPIO™ X3 Advanced Locked Web Browser options General Enable Locked When checked, enables the Locked Web Browser when Internet Web Browser Explorer is launched. Disable Cache Prevents the browser from loading the local intranet page from cache instead of navigating to the “Network Disconnected” error redirection page.
  • Page 107 USE AND FUNCTIONING Context Menu Enable Context Enables the context menu accessed by a touch screen press in Menu the Locked Web Browser. Refresh Adds a “Refresh” item to the Locked Web Browser context menu. Selecting the “Refresh” item refreshes the web page. Stop Adds a “Stop”...

  • Page 108: Status Icons Options (Status Tab)

    SKORPIO™ X3 4.10.3 Status Icons Options (Status Tab) Tap the “Status” tab to access the Status Icons option. You can configure the view of some status icons that are used in “LockedWeb” and in “Application Selector” to display the status of: wi-fi radio, battery and GSM. The GSM status icon feature is available only on devices that support GSM.

  • Page 109: Windows Controls

    USE AND FUNCTIONING 4.10.4 Windows Controls Select/tap the “Win” (Windows Controls) tab to access the Windows Controls option. Use Windows controls to allow or restrict access to Windows system functions. You can disable normal Windows functions such as the taskbar, leaving nothing but a blank workspace.
  • Page 110 SKORPIO™ X3 Windows Controls Select/tap “Taskbar Enabled” to specify whether the Taskbar Enabled taskbar is accessible. Enables the AutoSIP Windows feature. AutoSIP Enabled This control only take effects in WebAppLock. Scroll Bars Enabled When checked, displays horizontal and vertical scroll bars to help view large web pages which do not fit the screen.

  • Page 111: Appselector Options (Appselect Tab)

    USE AND FUNCTIONING 4.10.5 AppSelector Options (AppSelect tab) Tap the Application Selector (“AppSelect” Tab) to edit, add, or delete applications for the application selector. Application Selector Options Enable Application Selector Select/tap “Enable Application Selector” enable/disable application selector. When enabled, the Application Selector replaces the desktop allows only...
  • Page 112 SKORPIO™ X3 Application Selector Commands Select/tap “New” to create a new application entry. Edit Select/tap “Edit” to edit the selected entry. Select/tap “Del” to delete the selected entry. Select/tap “Up/Down” to move an entry up or down in Up/Down the Authorized Applications list.
  • Page 113 USE AND FUNCTIONING Add Applications The “Add Application” dialog opens when you tap either “New” or “Edit”. From the “Add Application” dialog the administrator can configure and/or add/change a new application entry in the list. Applications with the “Run Application at Startup” option enabled will start automatically when the Application Selector starts up.
  • Page 114 SKORPIO™ X3 COMMAND DESCRIPTION Displays the path/link to the desired icon file. Icon File Select/tap to browse for the desired icon file. The Browse results of this search are placed in the “Icon File” textbox. Select/tap this box to force this application to auto start when the Application Selector starts up.

  • Page 115: Appselector (Application Selector)

    Additionally, the page template can be modified to display a different background. Contact your Datalogic representative for more information on this feature. To exit from Application Selector, press ALT + 6, uncheck the ‘Enable Application...

  • Page 116: 4.12 Locked Web Browser

    SKORPIO™ X3 4.12 LOCKED WEB BROWSER The Locked Web Browser is a web browser helper object for Internet Explorer. It allows an administrator to define a restricted internet usage environment. Once in the restricted environment, a password is required to exit. This means users can only access web applications and websites set by the administrator.
  • Page 117 USE AND FUNCTIONING For firmware versions 1.60 and newer, the following command line arguments are supported: /E optional parameter which allows for Exit without entering a password @URL optional parameter which specifies a URL to use as a home page. /C optional parameter which disables the ctrl keys (including the one to exit).

  • Page 118: Locked Web Browser Special Meta-Tags

    </head> tag set. Also, the head tag set must be complete within the first 15K of the web page. The Datalogic Locked Web Browser defines some special metatags that allow the web application to interact with the device: In particular, the special metatags allow it to:...
  • Page 119 USE AND FUNCTIONING GetSerialNumber Metatag DL_GetSerialNumber – Obtains the device serial number and sends it as an argument to a customer’s javascript function. Content – name of function to pass serial number to. Example: <meta http-equiv="DL_GetSerialNumber" content="Javascript:CustomerFunction"> When a page with this metatag is loaded, the content should be a javascript function that receives one parameter, the serial number.
  • Page 120 SKORPIO™ X3 Decoding Metatags: Each decoding metatag has a possible content of “Enable” or “Disable”. The settings are valid for the entire page (enables/disables each symbology). DL_Code_39 DL_Code_128 DL_Code_I25 DL_Code_S25 DL_Code_M25 DL_Code_CODABAR DL_Code_93 DL_Code_UPCA DL_Code_UPCE DL_Code_EAN13 DL_Code_EAN8 DL_Code_MSI DL_Code_MSR DL_Code_GS1_14 DL_Code_GS1_LIMIT DL_Code_GS1_EXP DL_Code_PDF417...
  • Page 121 USE AND FUNCTIONING Key press Metatags The key press metatags can be used to call JavaScript functions. They have the name structure: “DL_Key_xxx” where xxx is the VKey code. Example: <meta http-equiv="DL_Key_13" content="Javascript:CheckEnter();"> Assigning a key press via a DL_Key metatag overrides its use on the page. For instance, when entering data in a text box a character assigned as a DL_Key would not be entered in the text box.

  • Page 122: 4.13 Pal And Pal Communicator

    For further information refer to the Pal & Pal Communicator User's Guide, downloadable from our website. Use the following path: Support & Services > Automatic Data Capture > Software & Utilities > Utilities. You can also click on the following link for direct access to the section “Software & Utilities”: www.datalogic.com/products_updates.

  • Page 123: 4.14 Autostart

    Allows you to create a list of applications (with optional command line arguments) to run automatically after loading CAB files. AutoStart launches each time the Skorpio X3 is rebooted executing each line with the specified command line arguments. It will take into account any AutoStart options at the beginning of the line.

  • Page 124: How Autostart Uses Wceload

    SKORPIO™ X3 4.14.2 How AutoStart Uses Wceload If you intend to create highly interactive installers, you should either install the CABs manually or review the section on “Interactive CAB Install” in this chapter.. NOTE In certain environments, CAB files will be deleted after execution. To prevent the CAB file from being deleted, write protect the file before copying the file onto the device.

  • Page 125: Interactive Cab Install

    NOTE identical to that of Autostart.ini..” Autostart.ini is a text file that AutoStart will run upon startup of the Skorpio X3, and after any CAB files are installed. This file should be placed in the \root folder. AutoStart will run the Autostart.ini file on each reboot of the device.
  • Page 126 SKORPIO™ X3 The following table breaks down the sample Autostart.ini line: Autostart option(s) Full path to executable Command line arguments \windows\pword.exe \file.doc Spaces must be placed between each component of the line in the Autostart.ini. If the executable path is in a folder that contains spaces in the name, quotes are required to distinguish what the actual executable name is.
  • Page 127 USE AND FUNCTIONING AutoStart Options The table below shows options you can use when writing a line in the Autostart.ini file. Description Character Comments This may only be used as the first character of the line. If the Comment: This line will not be ‘#’...
  • Page 128 SKORPIO™ X3 Combining Options Autostart options can be combined together as shown in the following sample: ?- \Windows\Pword.exe This line would: − Request confirmation before executing the line. The next line would not be processed before the confirmation is answered. −...
  • Page 129 USE AND FUNCTIONING The fields may be broken up into multiple lines (as shown in the example) due to limited space in the dialog. NOTE AutoStart Query Options Parentheses are used to surround the given field and make it very clear what the value of the field is.
  • Page 130 SKORPIO™ X3 Autostart.ini Samples The next table is a collection of sample Autostart.ini lines: Line Description This will confirm execution ? \windows\wceload.exe “\My \Windows\wceload.exe with specified argument Documents\Sample.cab” “\My Documents\Sample.cab” (invalid) This will execute \Program with the \Program Files\App.exe argument Files\App.exe. (invalid) This will execute \Program with the \Program Files\App.exe /run argument Files\App.exe /run.

  • Page 131: Technical Features

    ESD PROTECTION 4 KV contact discharge, 8 KV air discharge Skorpio X3 (including spare battery) should be charged at an ambient temperature between 0 - 35º C to achieve the maximum charging rate. Never charge the main device or spare...
  • Page 132 SKORPIO™ X3 SYSTEM Microsoft Windows Embedded Handheld 6.5 with Office Mobile 2010: Outlook, Word Mobile, Excel OPERATING SYSTEM Mobile, PowerPoint Mobile, One Note Mobile and Internet Explorer Mobile 6.0 MICROPROCESSOR XScale™ PXA310 @ 624 MHz SYSTEM RAM MEMORY 256 MB SYSTEM FLASH MEMORY 512 MB Removable battery pack with rechargeable Li-ion...
  • Page 133 TECHNICAL FEATURES READING OPTIONS LASER CHARACTERISTICS SCANNING RATE 104 ± 12 scan/sec OPTICAL RESOLUTION 0.10 mm / 4 mils DEPTH OF FIELD See reading diagrams (5.2) SKEW ANGLE ± 50° PITCH ANGLE ± 65° LASER READER VLD, wavelength 630~670 nm GS1 DataBar family, EAN/UPC, Code 39, 2/5 BAR CODES Codes, MSI, Codabar, Code 128, GS1-128, Code...

  • Page 134: Decode Distances

    SKORPIO™ X3 DECODE DISTANCES Skorpio X3 Standard Laser 1D Symbol Density/ Guaranteed Bar Code Type/ Working Ranges W-N Ratio 5.0 mil 5.11 in Code 39; 2.5:1 12.97 cm 7.5 mil 9.11 in Code 39; 2.5:1 23.13 cm 10 mil 13.61 in Code 39;...
  • Page 135 TECHNICAL FEATURES Skorpio X3 Standard Range Imager 1D/2D Symbol Density/ Far Guaranteed Bar Code Type Working Ranges 5.0 mil 6.41 in Code 39 16.27 cm 6.67 mil 5.81 in PDF417 14.75 cm 7.5 mil 9.20 in Code 39 23.38 cm 10 mil 8.61 in...
  • Page 136 SKORPIO™ X3 Skorpio X3 White Illumination Imager 1D/2D Far Guaranteed Depth of Field Working Ranges 4.72 in Code 39 12 cm 8.27 in Code 39 21 cm 6.69 in 17 cm 14.57 in EAN13 37 cm 9.25 in Datamatrix 23.50 cm 19.29 in...

  • Page 137: Test Codes

    TEST CODES TEST CODES High Density Codes 0.25 mm (10 mils) !17162H! Code 39 17162 Ë"8NduÌ 2/5 Interleaved 0123456784 ÌtestwÎ Code 128 test x(0B2DE5*KKKKLM( EAN 13 (6450*TRMN( EAN 8...
  • Page 138 SKORPIO™ X3 Medium Density Codes 0.38 mm (15 mils) !17162H! Code 39 17162 Ë"8NduÌ Interleaved 2/5 0123456784 ÌtestwÎ Code 128 test 100% x(0B2DE5*KKKKLM( EAN 13 100% (6450*TRMN( EAN 8...
  • Page 139 TEST CODES Low Density Codes 0.50 mm (20 mils) !17162H! Code 39 17162 Ë"8NduÌ Interleaved 2/5 0123456784 ÌtestwÎ Code 128 test 120% x(0B2DE5*KKKKLM( EAN 13 120% (6450*TRMN( EAN 8...
  • Page 140 SKORPIO™ X3 2D Codes Datamatrix ECC200 Example Inverse Datamatrix ECC200 Example...

  • Page 141: Regulatory Information

    Use only the components supplied by the manufacturer for the specific Skorpio X3 being used. − Do not attempt to disassemble the Skorpio X3 mobile computer, as it does not contain parts that can be repaired by the user. Any tampering will invalidate the warranty.

  • Page 142: Laser Safety

    LASER SAFETY The laser light is visible to the human eye and is emitted from the window indicated in the figure. This information applies to both the Skorpio X3 models with laser and Imager Aiming System. Laser output window...
  • Page 143 Die Laserstrahlung ist für Le rayon laser est visible La luce laser è visibile La luz láser es visible al das menschliche Auge à l'oeil nu et il est émis all'occhio umano e viene ojo humano y es emitida sichtbar und wird am par la fenêtre désignée emessa dalla finestra por la ventana indicada...
  • Page 144 ENGLISH The following information is provided to comply with the rules imposed by international authorities and refers to the correct use of your mobile computer. STANDARD LASER SAFETY REGULATIONS This product conforms to the applicable requirements of both CDRH 21 CFR 1040 Subchapter J and EN 60825-1:2007 at the date of manufacture.
  • Page 145 Non tentare di accedere allo scomparto contenete i componenti ottici o di farne la manutenzione. L’apertura dello scomparto, o la manutenzione di qualsiasi parte ATTENZIONE ottica da parte di personale non autorizzato, potrebbe violare le norme della sicurezza. Il sistema ottico può essere riparato solamente alla fabbrica.
  • Page 146 Unter keinen Umständen darf versucht werden, die Komponenten im Optikhohlraum zu öffnen oder auf irgendwelche andere Weise zu warten. Öffnen bzw. Warten Komponenten Optikhohlraum durch unbefugtes Personal verstößt gegen die ACHTUNG Laser-Sicherheitsbestimmungen. Optiksystem darf werkseitig repariert werden. Jegliche Änderungen am Gerät sowie Vorgehensweisen, die nicht in dieser Betriebsanleitung beschrieben...
  • Page 147 L'utilisation de procédures ou réglages différents de ceux donnés ici peut entraîner une dangereuse exposition à lumière laser visible. ATTENTION Le produit utilise une diode laser. Aucun dommage aux yeux humains n’a été constaté à la suite d’une exposition au rayon laser. Eviter de regarder fixement le rayon, comme toute autre source lumineuse intense telle que le soleil.

  • Page 148: Led Class

    El uso de sistemas ópticos con el escáner aumentará el riesgo de daños oculares. Los instrumentos ópticos incluyen binoculares, microscopios, lentes y lupas. ATENCIÓN LED CLASS LED illuminator integrated in the Skorpio X3 models with imager engines are compliant with exempt risk group requirements according to EN62471:2008 and IEC62471:2006.

  • Page 149: Radio Compliance

    RADIO COMPLIANCE In radio systems configured with mobile computers and access points, the frequencies to be used must be allowed by the spectrum authorities of the specific country in which the installation takes place. Be absolutely sure that the system frequencies are correctly set to be compliant with the spectrum requirements of the country.
  • Page 150 Information for the User ENGLISH Contact the competent authority responsible for the management of radio frequency devices of your country to verify any possible restrictions or licenses required. Refer site http://ec.europa.eu/enterprise/sectors/rtte/documents/contacts- points/spectr/ for further information. ITALIANO Contatta l'autorità competente per la gestione degli apparati a radio frequenza del tuo paese, per verificare eventuali restrizioni o licenze.

  • Page 151: Fcc Compliance

    FCC COMPLIANCE FCC Regulations • This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • Page 152: Rf Exposure Information (Sar)

    RF EXPOSURE INFORMATION (SAR) This model device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S.

  • Page 153: Industry Canada Compliance

    SAR COMPLIANCE This product has been tested and found to comply with the following standards: For the used worst case positions, the portable device Skorpio X3 from Datalogic (FCC ID: U4G0060; contains FCC ID: U4G004W) is in compliance with the IC RSS 102 Issue 4 [RSS 102] and Federal Communications Commission (FCC) Guidelines [OET 65] for uncontrolled exposure.

  • Page 154: Weee Compliance

    For more detailed information about disposal, contact the supplier that provided you with the product in question or consult the dedicated section at the website http://www.datalogic.com.
  • Page 155 Auswirkungen für die Umwelt und die Gesundheit der Menschen  ermöglicht die Wiederverwendung der Materialien und spart somit Energie und Resourcen Weitere Informationen zu dieser Richtlinie erhalten sie von ihrem Lieferanten über den sie das Produkt erworben haben, oder besuchen sie unsere Hompage unter http://www.datalogic.com.

  • Page 156: Glossary

    GLOSSARY Access Point A device that provides transparent access between Ethernet wired networks and IEEE 802.11 interoperable radio-equipped mobile units. Hand-held mobile computers, PDAs or other devices equipped with radio cards, communicate with wired networks using Access Points (AP). The mobile unit (mobile computer) may roam among the APs in the same subnet while maintaining a continuous, seamless connection to the wired network.
  • Page 157 Decode To recognize a bar code symbology (e.g., Codabar, Code 128, Code 3 of 9, UPC/EAN, etc.) and convert the content of the bar code scanned from a visual pattern into electronic data. Depth of Field (DOF) The portion of a scene that appears acceptably sharp in the image. Although a lens can precisely focus at only one distance, the decrease in sharpness is gradual on each side of the focused distance, so that within the DOF, the unsharpness is imperceptible under normal viewing conditions.
  • Page 158 IEEE 802.11 A set of standards carrying out wireless local area network (WLAN) computer communication in the 2.4, 3.6 and 5 GHz frequency bands. They are created and maintained by the IEEE LAN/MAN Standards Committee. Light Emitting Diode (LED) A low power electronic light source commonly used as an indicator light. It uses less power than an incandescent light bulb but more than a Liquid Crystal Display (LCD).
  • Page 159 TDMA Time division multiple access (TDMA) is digital transmission technology that allows a number of users to access a single radio-frequency (RF) channel without interference by allocating unique time slots to each user within each channel. The TDMA digital transmission scheme multiplexes three signals over a single channel. The current TDMA standard for cellular divides a single channel into six time slots, with each signal using two slots, providing a 3 to 1 gain in capacity over advanced mobile- phone service (AMPS).

  • Page 160: Index

    Imager Data Capture; 38 Regulatory Information; 133 Laser Data Capture; 37 Replacing the Batteries; 16 Data Capture Configuration; 53 Resetting the Skorpio X3; 48 Datalogic Configuration Utility; 90 RF Exposure Information (SAR); 144 Datalogic Desktop Utility; 91 Datalogic Firmware Utility; 87 Decode Distances;...
  • Page 161 Taskbar; 51 WEEE Compliance; 146 Technical Data; 123 Windows Embedded Handheld Technical Features; 123 Welcome Wizard; 35 Terminal Emulation Overlay Insertion; Windows Mobile® Device Center; 77 Wireless and Radio Frequencies Test Codes; 129 Warnings; 31 Wireless Communications; 67 Using the Stylus; 34...

  • Page 162: Declaration Of Conformity

    DECLARATION OF CONFORMITY Datalogic ADC S.r.l. Via S. Vitalino 13 40012 - Lippo di Calderara Bologna - Italy dichiara che declares that the déclare que le bescheinigt ,daß das Gerät declare que el SKORPIO X3 modelli con funzionalità radio 802.11a/b/g+BT models with 802.11a/b/g+BT radio feature...
  • Page 163 ETSI EN 301 489-17 V2.1.1 MAY 2009: ELECTROMAGNETIC COMPATIBILITY RADIO SPECTRUM MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD RADIO EQUIPMENT; PART 17: SPECIFIC CONDITIONS FOR 2,4 GHZ WIDEBAND TRANSMISSION SYSTEMS, 5 GHZ HIGH PERFORMANCE RLAN EQUIPMENT BROADBAND DATA TRANSMITTING SYSTEMS ETSI EN 300 328 V1.7.1, OCTOBER 2006: ELECTROMAGNETIC COMPATIBILITY RADIO...
  • Page 164 © 2012-2015 Datalogic ADC S.r.l. All rights reserved. Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. In many countries, including the U.S.A. and the E.U. Datalogic ADC S.r.l. Via S. Vitalino, 13 40012 Lippo di Calderara di Reno...

Table of Contents