Table of Contents
Advertisement
USB or CARD PLAYBACK
1. Insert the USB Device or SD/MMC memory card into the USB port /card slot as the figure below.
NB: The unit supported to playback:
~ MP3; WMA (Music file)
~ JPG (Pictures)
~ MPEG2; AVI; VOB (Video files up to 640 x 480 pixels)
Make sure correct files were saved in the USB device or memory cards.
2. In Power ON mode, press the USB/CARD Button, the "DVD, CARD, USB" selection window
will pop up on the screen. Using the Direction Buttons to select and highlight the desired
source then press the OK Button to confirm. Press the OK Button again, the
Folder/File list will appear, using the Direction button to select the desire File then press the
OK Button to start playback.
3. During playback:
~ Press the
or
~ Press the
or
~ Press the
Play/Pause Button to pause. Press again to resume.
4. When finished, press the
to power off (Standby) the unit.
NB: For saving battery power. If long period of time will not use, power off
the unit by slide the ON/OFF Switch to OFF position.
Using the supplied earphone to listen privately.
CARD
USB
Button repeatedly to skip tracks.
Button repeatedly to select and set the fast searching speed.
STOP Button to stop. Press the POWER Button
AV-OUT
AV-IN
OFF
ON
16
DC IN
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the ONA16AV009 and is the answer not in the manual?
Questions and answers
I do not know where the stop and pause button is
The Play/Pause button is located on the remote control and is labeled as item 8. There is no separate Stop button mentioned in the provided context.
This answer is automatically generated