Motorola DCT6400 Series User Manual page 36

Connecting an A/V Receiver, TV, and VCR
1
Connect an RF coaxial cable to the cable wall outlet and the
connector on the DCT*.
CABLE IN
2
Connect a stereo audio cable to the
on the DCT* and the
3
Connect a video cable to the
the /
CABLE TV VIDEO
4
Connect a stereo audio cable to the
connectors on the A/V receiver and the
connectors on the stereo VCR.
5
Connect a stereo audio cable to the
connectors on the stereo VCR and the
connectors on the A/V receiver.
6
Connect a video cable to the
VCR and the
VIDEO VCR OUT
7
Connect a video cable to the
VCR and the
VIDEO VCR IN
8
Connect a video cable to the
TV and the /
TV MONITOR OUTPUT
receiver.
If your equipment supports it:
The optical (
OPTICAL SPDIF
used in place of the stereo audio outputs (
cases these outputs offer a higher level of audio quality, including
support for 5.1 surround sound.
S-video connections may be used in place of the standard RCA
video connections. In most cases, S-video offers a higher level of
standard definition video quality than RCA video.
The video connection method does not support HD video. For more
information, see "Connecting your DCT* to an HDTV – Video Only" on
page 18.
DCT6400 Series User Guide
AUDIO OUT R
and connectors on the A/V receiver.
INPUT R L
connector on the DCT* and
VIDEO OUT
connector on the A/V receiver.
VCR AUDIO OUT R
INPUT AUDIO R
OUTPUT AUDIO OUT R
VCR AUDIO IN R
connector on the stereo
INPUT VIDEO
connector on the A/V receiver.
connector on the stereo
OUTPUT VIDEO
connector on the A/V receiver.
connector on the stereo
INPUT VIDEO
video connector on the A/V
) or coaxial ( ) audio outputs may be
SPDIF
AUDIO R
29
and connectors
L
and
L
and
L
and
L
and
L
and L). In most