Flight Settings; Recording Settings - Parrot BEBOP 2 DRONE User Manual

Three piloting modes are available: Normal,
more information about these modes, see the

Flight settings

Calibrate
Flat Trim
Max vertical speed
Max rotation speed

Recording settings

The Bebop 2 is e q uipped with a fisheye (wide-angle) camera.
Note:
The camera lens is situated at the front of the
Bebop 2
the
24
Settings
Calibrate the Bebop 2. Use this feature when the Bebop 2
does not stay on course correctly.
The flat trim feature is used to calibrate the internal sensors
for level flight. It is recommended that you complete a flat
trim after each battery change or if the Bebop 2 will not hover
in place correctly. For more information, see the Flat Trim
section.
Define a maximum speed when you fly the Bebop 2 upwards.
Define a maximum speed when you make the Bebop 2 rotate.
When you fly the Bebop 2 hori z ontally, its speed depends on
the angle of inclination.
is for stabilization only.
J oypad (activated by default) and Ace. For
Movement section.
Bebop 2
. The camera situated under