Makita HR2631F Instruction Manual
Combination hammer
Hide thumbs
Also See for HR2631F:
- Instruction manual (88 pages) ,
- Instruction manual (65 pages) ,
- Instruction manual (49 pages)
Related Manuals for Makita HR2631F
Summary of Contents for Makita HR2631F
- Page 1 INSTRUCTION MANUAL Combination Hammer HR2631F HR2631FT HR2641 HR2320T HR2630 HR2630T 015335 DOUBLE INSULATION IMPORTANT: Read Before Using.
-
Page 2: Specifications
The following show the symbols used for the equipment. according to EN60745: Be sure that you understand their meaning before use. ･ Read instruction manual. Model HR2631F, HR2631FT, HR2641 Sound pressure level (L ) : 90 dB (A) ･ DOUBLE INSULATION... -
Page 3: Ec Declaration Of Conformity
) : 2.5 m/s or less Designation of Machine: Uncertainty (K) : 1.5 m/s Combination Hammer Model No./ Type: HR2631F, HR2631FT, HR2641, Model HR2630 HR2320T, HR2630, HR2630T Work mode : hammer drilling into concrete Conforms to the following European Directives: Vibration emission (a ) : 15.5 m/s... -
Page 4: General Power Tool Safety Warnings
Yasushi Fukaya recommended. Director Personal safety Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium Stay alert, watch what you are doing and use common sense when operating a power tool. Do GEA005-3 not use a power tool while you are tired or under General Power Tool Safety Warnings the influence of drugs, alcohol or medication. -
Page 5: Rotary Hammer Safety Warnings
21. Store idle power tools out of the reach of Under normal operation, the tool is designed children and do not allow persons unfamiliar to produce vibration. The screws can come with the power tool or these instructions to loose easily, causing a breakdown or accident. operate the power tool. -
Page 6: Functional Description
• 2. Lock button to a complete stop. Changing the direction of rotation before the tool stops may damage the tool. For Model HR2631F, HR2631FT, HR2320T, HR2630, HR2630T CAUTION: 015360 To start the tool, simply pull the switch trigger. Tool If the switch trigger can not be depressed, check •... - Page 7 For Model HR2641 Attaching the quick change drill chuck 1. Reversing 1. Spindle switch lever 2. Quick change drill chuck 3. Change cover line 4. Change cover 015361 015340 Check the line of the quick change drill chuck shows the NOTE: symbol.
-
Page 8: Torque Limiter
Hammering only ASSEMBLY 1. Hammering only CAUTION: Always be sure that the tool is switched off and • unplugged before carrying out any work on the tool. Side grip (auxiliary handle) 1. Protrusions 015342 2. Grooves For chipping, scaling or demolition operations, rotate the action mode changing knob to the symbol. -
Page 9: Depth Gauge
Insert the bit into the tool. Turn the bit and push it in until Depth gauge it engages. The depth gauge is convenient for drilling holes of After installing, always make sure that the bit is securely uniform depth. held in place by trying to pull it out. 1. - Page 10 To remove the dust cup, pull the chuck cover in the NOTE: direction as shown in the figure and with the chuck Inserting the depth gauge with its toothed side not • cover pulled take the bit out of the tool. directed to the toothed side of hex hole marking on the grip base as shown in the figure does not allow 1.
-
Page 11: Operation
NOTE: Eccentricity in the bit rotation may occur while operating the tool with no load. The tool automatically centers itself during operation. This does not affect the drilling precision. Blow-out bulb (optional accessory) 1. Blow-out bulb 015354 NOTE: If you connect a vacuum cleaner to your hammer, •... - Page 12 32 mm diameter in wood. 015340 Use the quick change drill chuck as standard equipment. When installing it, refer to "changing the quick change For Model HR2631F, HR2641, HR2630 chuck for SDS-plus " described on the previous page. 1. Drill chuck assembly 1.
-
Page 13: Maintenance
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. SDS-Plus Carbide-tipped bits • Core bit • Bull point •... - Page 16 Makita Jan-Baptist Vinkstraat 2, 3070, Belgium Makita Corporation Anjo, Aichi, Japan www.makita.com 885385-229...