3.3.16 Volume control
To adjust the listening volume on a handset: Press
the listening volume when on a call. Each press of the button
increases or decreases the volume level by one increment.
NOTES
1. All volume settings (handset and speakerphone) are
independent.
2. When the volume reaches the minimum or maximum
setting, you will hear two beeps.
3.3.17 Multiple handset use
You can conference with another system handset while you
are on a HOME or CELLULAR call. However, you cannot
conference between a HOME call and a CELLULAR call. A
maximum of two handsets can be used on an outside call. If
a handset is already on a HOME call and you would like to
<
J
join the call, press
or
OR
If a handset is already on a CELLULAR call and you would
I
like to join the call, press
>
Press
or place the handset in the telephone base or
26
,
to adjust
on another system handset.
on another system handset.
charger to end the call. The call will not be terminated until
all handsets hang up.
NOTE
A maximum of four handsets can be used at a time. When
two handsets are being used on either the HOME or
CELLULAR call, the other two system handsets can be
used for a call on the line that is not being used.
3.3.18 Mute
The mute function allows you to turn off the microphone. You
can hear the caller, but the caller will not be able to hear you.
To mute a call:
/
• Press
to turn off the microphone. When mute is on,
the handset screen will show
and the
icon will be shown until mute is turned off.
To un-mute a call:
/
• Press
again and resume speaking. When mute is
MICROPHONE ON
turned off,
handset screen.
MUTED
for a few seconds
will display temporarily on the
Using the phone