Connecting Your Wifi Modem - The Foxtel Hub - Foxtel Hub Quick Install Manual

Connecting your WiFi modem – the Foxtel Hub
Connect the end of the ADSL filter
1
'Wall socket' into your phone socket located
on your wall.
If you have a home phone, connect your
2
existing phone cable into the ADSL filter
input labelled 'Phone' .
Connect the grey ADSL connection cable
3
into the input of the ADSL filter labelled 'Modem' .
Connect the other end of the ADSL connection
cable to the 'DSL' input on your Foxtel Hub.
Time to power up. Connect the Power pack
4
cable from your Foxtel Hub to your power point
and ensure the power is switched on.
Press the power button on the back of your
5
Foxtel Hub and the device will start to setup. It's
best to let the device do its thing and come back
in 10 minutes, but if you stick around you'll see a
light sequence on the internet icon – flashing red,
solid red, solid blue, flashing red, solid red and
finally a continuous solid blue
Foxtel Broadband is ready.
Don't plug any other devices into
your Hub until all blue lights appear.
Need assistance? See page 9.
labelled
A
DSL
B
USB
C
10/100
Gigabit
WAN
Reset
. Now your
Power
3
Cable not supplied
5
DC
If you don't have a home
phone handset, simply
use the ADSL connection
cable to connect your Hub
straight into your wall
socket. No filter required!
B
Modem
Phone
2
Have a Home Phone?
Connect the ADSL
filter to the socket
A
where your home
phone is located .
1
For more information
about your home
phone go to page 10.
4
C
A
1
5