6Printer Tests; Printer Tests - Canon MultiPASS MP390 Service Manual

Chapter 5
CNG are detected from the modular jack, the display changes from OFF to ON and the received frequency is
displayed.
c-2) Test Menu 2
Test Menu 2 is selected by pressing the numeric key 2 or
frequency is detected from the modular jack, the display changes from OFF to ON and the received frequency is
displayed. The frequency detection level can be set with the numeric keys.
c-3) Test Menu 3
Test Menu 3 is selected by pressing the numeric key 3 or
is detected from the modular jack, the display changes from OFF to ON.

5.7.6 PRINTER Tests

Select 8:PRINTER TEST from the test mode menu by pressing the numeric key 8 or
3:EEPROM CLEAR, and the press the numeric key 3 or
numeric key 0 or and keys to reset the waste ink capacity.
Note:
Be sure to reset waste ink capacity only when replacing the waste ink absorbing material to a new one. If waste ink
capacity is reset in other situations, it may result in faulty caunt.
5-32
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
key and
T-5-5
Numeric key Detection level (dBm)
0
1
2
3
4
5
6
7
8
9
key and
and keys. Select [0] INK COUNT, and then press the
key from the Line Detect menu. When a tonal
-26
-30
-32
-35
-38
-41
-43
-45
-47
-51
key from the Line Detect menu. When CNG
and
0004-4237
keys. Select 8-