Mitsubishi Electric MJ-E14CG-S1-IT Service Manual page 29

(12)Removing and replacing the float switch
①Remove the blower fan assembly.
②Remove the float switch form the drainpan
(13)Removing the drainpan
①Remove the blower fan assembly.
②Separate all the lead wires from the
clampers on the drainpan assembly.
③
the front side of drainpan assembly.
Pull the base backward while lifting the
right side of the heat exchanger and
remove the drainpan assembly from the
Drainpan assembly
②
③
Heat exchanger
③
Base
Drainpan assembly Heat exchanger assembly
Float switch
Rear side of the drainpan assembly Rear side of the drainpan assembly
Catches
③
Front side of the Front side of the
drainpan assembly drainpan assembly
③
Front side of the Front side of the
drainpan assembly drainpan assembly
Compressor Catch
Base Catch
Base
29