Table of Contents
Advertisement
(261PO) Sand Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5" X 10.3" PANTONE 295U 07/23/2014
Sand Filter Pump &
Saltwater System with E.C.O.
(Electrocatalytic Oxidation)
Model ECO 20110 & 15110
For illustrative purposes only.
Don't forget to try these other fine Intex products: pools, pool
accessories, inflatable pools and in-home toys, airbeds and boats
available at fine retailers or visit our website.
Due to a policy of continuous product improvement, Intex reserves the
right to change specifications and appearance, which may result in
updates to the instruction manual without notice.
DO NOT RETURN PRODUCT TO STORE
To purchase parts and accessories or to obtain non-technical assistance, Visit
For technical assistance and missing parts call us toll-free (for U.S. and Canadian Residents):
Monday through Friday, 8:30am to 5:00pm Pacific Time
IMPORTANT
SAFETY RULES
Read, understand, and follow
all instructions carefully before
installing and using this product.
IMPORTANT!
www.intexcorp.com
1-800-234-6839
261
English
PO
261-*PO-R0-1507
Advertisement
Table of Contents
Related Manuals for Intex ECO 20110
Summary of Contents for Intex ECO 20110
-
Page 1: Safety Rules
(Electrocatalytic Oxidation) Model ECO 20110 & 15110 For illustrative purposes only. Don’t forget to try these other fine Intex products: pools, pool accessories, inflatable pools and in-home toys, airbeds and boats available at fine retailers or visit our website. Due to a policy of continuous product improvement, Intex reserves the right to change specifications and appearance, which may result in updates to the instruction manual without notice. -
Page 2: Table Of Contents
Salt & Pool Water Volumes............20 Intex Pools Salt Table..............21 Intex Pools Cyanuric Acid Table..........22 Intex Pools Operating Time Table ..........23 Non-Intex Pools Salt Table............24 Non-Intex Pools Cyanuric Acid Table......... 24 Non-Intex Pools Operating Time Table........24 Maintenance................... -
Page 3: Warnings
(261PO) Sand Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014 English IMPORTANT SAFETY RULES Read, Understand and Follow All Instructions Carefully Before Installing and Using this Product. READ AND FOLLOW ALL INSTRUCTIONS WARNING • To reduce the risk of injury, do not permit children to use this product. Always supervise children and those with disabilities. -
Page 4: Parts References
(261PO) Sand Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014 English PARTS REFERENCE Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts. Parts shown on this page are supplied with the pool package and are shown here for assembly purposes only. -
Page 5: Parts References
(261PO) Sand Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014 English PARTS REFERENCE (continued) Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts. SPARE PART NO. - Page 6 (261PO) Sand Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014 English POOL OUTLET - STRAINER & PLUNGER VALVE SETUP (optional) Please visit www.intexcorp.com for the latest instructional video on the installation and operation of this product. The strainer grid prevents large objects from jamming and/or damaging the filter pump.
- Page 7 (261PO) Sand Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014 English POOL INLET - NOZZLE & PLUNGER VALVE SETUP (optional) 1. In a counter-clockwise motion unscrew plunger valve union from the threaded strainer connector (33) (see drawing 5). Be careful not to lose the step rubber washer (30).
-
Page 8: Setup Instructions
Motor pre-filtering assembly setup: Remove the sand filter and its accessories from the packaging carefully and inspect for any visible damage. For missing or damaged parts contact the appropriate Intex Service Center listed in the separate “Authorized service Centers” sheet. In a counter-clockwise motion unscrew the leaf trap cover (14) from the pre-filter housing. - Page 9 (261PO) Sand Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014 English SETUP INSTRUCTIONS (continued) 4. In a clockwise motion screw filter housing nut (17) onto the motor water inlet (See drawings 12.1 & 12.2). 12.2 12.1 5.
- Page 10 (261PO) Sand Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014 English SETUP INSTRUCTIONS (continued) Sand loading: IMPORTANT: Use No. 20 silica sand or glass sand with particle size range 0.45 to 0.85 mm (0.018 to 0.033 inches) and a Uniformity Coefficient less than 1.75. NOTE: Before loading the tank with sand, ensure the center pipe hub assembly is securely in place at the bottom of the tank, and vertically centered inside the tank.
- Page 11 (261PO) Sand Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014 English SETUP INSTRUCTIONS (continued) WARNING Improper tank valve and clamp assembly could cause the valve and clamp to blow off and cause serious injury, property damage or death. 6-way valve installation: Lower the 6-way valve over the tank slowly, and ensure the bypass pipe protruding underneath the 6-way valve fits securely into the center pipe hub (8) top opening (see...
- Page 12 (261PO) Sand Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014 English SAND FILTER PUMP HOSE CONNECTION SETUP WARNING • Position this product away from the pool, so as to prevent children from climbing on it and accessing the pool. The 6-way valve has three hose connection ports. 1.
- Page 13 Remove the drain valve (3) from the 6-way valve outlet and connect the hose to the outlet. POOL LARGE HOSE CLAMP For INTEX pool size 16' and below: 1. In a counter-clockwise motion unscrew plunger valve union from the threaded strainer connector (33). Be careful not to lose the step rubber washer (30). 2. Grasp the plunger valve assembly. Make sure the step washer (30) is in place. Connect adaptor B (35) to plunger valve union.
-
Page 14: Operating Instructions
(261PO) Sand Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014 English OPERATING INSTRUCTIONS WARNING • Risk of electric shock. Connect this product only to a grounding type receptacle protected by a ground-fault circuit interrupter (GFCI) or residual current device (RCD). Contact a qualified electrician if you cannot verify that the receptacle is protected by a GFCI/RCD. - Page 15 (261PO) Sand Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014 English OPERATING INSTRUCTIONS (continued) Initial startup and operation: Before operating, be sure that: • All the hoses have been connected and tightened securely, and correct amount of filter sand have been loaded. • The entire system is connected to a grounding type receptacle protected by a ground-fault circuit interrupter (GFCI) or residual current device (RCD). CAUTION The filter control valve has a closed position. The pump should never be on when the valve is in the closed position.
- Page 16 “BACKWASH” under “initial startup and operation” section. Vacuuming device (i.e. Intex auto pool cleaner) attached to the system may also cause the flow to diminish and the pressure to rise. Remove any vacuuming device from the system and check if the pressure gauge reading has dropped from the yellow zone to the green zone.
- Page 17 (261PO) Sand Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014 English SALTWATER SYSTEM OPERATION 1. Start up the unit: Plug the power cord into the electrical outlet and test the GFCI/RCD (circuit breaker). Switch on the unit. With the Filter Pump turned “ON” and operating. Flashing code“00” appears on the electronic control station’s LED, indicating that the unit is ready to be programmed. 2. Set operating hours for Saltwater System: With code “00”...
- Page 18 (261PO) Sand Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014 English SALTWATER SYSTEM OPERATION (continued) 5. Boost cycle • First time installation, press and hold “BOOST” button for 5 seconds until the indicator lights up and the LED display “80”. This indicates that the saltwater system has started E.C.O.
-
Page 19: Led Code Chart
(261PO) Sand Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014 English LED CODE CHART LED Reading Definitions Filter Pump Working Mode Boost Mode Stand-By Mode (Start-up) Minimum Operating Hour (1 hour remaining) Operating Hours (2 hours remaining) Operating Hours (3 hours remaining) Operating Hours (4 hours remaining) Operating Hours (5 hours remaining) Operating Hours (6 hours remaining) Operating Hours (7 hours remaining) Operating Hours (8 hours remaining) Operating Hours (9 hours remaining) Operating Hours (10 hours remaining) Operating Hours (11 hours remaining) Maximum Operating Hours (12 hours remaining) Alarm Code (Low Pump Flow / No Flow) Alarm Code (Low Salt Level) Alarm Code (High Salt Level) Stand-By Mode (Operating Process finished) “BLANK”... -
Page 20: Salt & Pool Water Volumes
(261PO) Sand Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014 English SALT & POOL WATER VOLUMES • Which kind of salt to use: Use only Sodium Chloride Salts Use only sodium chloride (NaCl) salt that is at least 99.8% pure. It is also acceptable to use water conditioning salt pellets (the compressed forms of evaporated salt). However, it will take a longer time for them to dissolve. Do not use iodized or yellow (yellow prussiate of soda) colored salt. -
Page 21: Intex Pools Salt Table
Easy Set & Oval Pool) Pool Size ECO20110 ECO15110 ECO20110 ECO15110 (Gals) (Liters) (Lbs) (Kgs) (Lbs) (Kgs) (Lbs) (Kgs) (Lbs) (Kgs) INTEX ABOVE GROUND POOLS (AGP’s) 15' x 33" (457cm x 84cm) 2587 9792 15' x 36" (457cm x 91cm) -
Page 22: Intex Pools Cyanuric Acid Table
(261PO) Sand Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014 English INTEX POOLS CYANURIC ACID TABLE Cyanuric acid is a chemical that reduces the loss of chlorine in water due to ultraviolet rays. To maintain the pool water clear and clean, and to maximize the performance of the device, add cyanuric acid to the pool. -
Page 23: Intex Pools Operating Time Table
(261PO) Sand Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014 English INTEX POOLS OPERATING TIME TABLE (WITH CYANURIC ACID) Water Capacity Operating Time (hours) (Calculated at 90% for at different ambient/air Frame Pool and 80% for temperatures Easy Set &... - Page 24 15000 6000 22500 8000 30000 8500 32000 10000 37500 12000 45500 14000 53000 CYANURIC ACID TABLE FOR COMMON NON-INTEX POOLS Cyanuric Acid Needed for Startup 0.03g/L (30ppm) Water Capacity ECO20110 ECO15110 (Gals) (Liters) (Lbs) (Kgs) (Lbs) (Kgs) 2000 7500 0.23 0.23...
- Page 25 (261PO) Sand Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014 English MOTOR PRE-FILTER CLEANING AND MAINTENANCE 1. Make sure the filter pump is switched off, then disconnect the power cord from the electrical outlet. 2.
- Page 26 (261PO) Sand Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014 English ELECTROLYTIC CELL CLEANING The titanium electrode and E.C.O. electrodes have a self cleaning function incorporated into the electronic control’s programming. In most cases this self cleaning action will keep the electrodes working at optimum efficiency.
-
Page 27: Maintenance
(261PO) Sand Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014 English MAINTENANCE (continued) ® INTEX TEST STRIPS (PACKED WITH THE PRODUCT) The Test Strips can test the “Free Chlorine”, “pH”, “Calcium Hardness” and “Total Alkalinity” levels at the same time. We recommend that you test the water chemistry weekly, and maintain the chlorine concentration at 0.5-3 ppm. - Page 28 (261PO) Sand Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014 English POOL MAINTENANCE & CHEMICAL DEFINITIONS Preferred Water Chemistry Reading Minimum Ideal Maximum Free Chlorine 0.5 - 3.0 ppm 5.0 ppm Combined Chlorine 0 ppm 0.2 ppm 7.4 - 7.6 Total Alkalinity...
-
Page 29: Long Term Storage
(261PO) Sand Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014 English LONG TERM STORAGE & WINTERIZATION CAUTION Allowing the water to freeze will damage the sand filter and void the warranty. If anti-freeze solution is needed, use only propylene glycol. Propylene glycol is non-toxic and will not damage plastic system components;... -
Page 30: Troubleshooting Guide
• Wrong 6-way valve setting • Load with filter sand, see “sand loading position. instructions”. • Excessively dirty pool. • Set valve to “ FILTER” position. • Dirt or sand on pool floor. • Operate the filter for longer periods. • The basket is restricting the water • Use Intex pool vacuum to clean bottom of pool. flow. • Clean the basket. • Clear any obstructions in the intake hose by • Clogged inlet or discharge. FILTER DOESN’T discharging it inside pool wall. • An air leak on the intake line. PUMP WATER OR • Tighten hose nuts, check hoses for damage, • Excessively dirty pool. - Page 31 • Plug the cell cord firmly into the cell • No power supply. NO LED DISPLAY housing receptacle. • RCD/GFCI has not reseted. • Reset the RCD/GFCI. • A power fuse has blown. • Contact Intex Service Center. • LED failure. • Contact Intex Service Center. SAVE THESE INSTRUCTIONS Page 31...
- Page 32 Volumes”. • Ensure that the cell cord is plugged 3. Electrolytic cell cord is loose. firmly into the cell housing receptacle. • Contact Intex Service Center. Replace 4. Possible electrolytic cell failure. the cell if needed. 1. High salt level. • Partially drain the pool and refill it with fresh water.
-
Page 33: Common Pool Problems
• Rip or hole in pool • Repair with a patch kit. LOW WATER on previous day. liner or hoses. • Finger tighten all caps. LEVEL • The drain valves are loose. SEDIMENT • Dirt or sand on • Heavy use, getting in • Use Intex pool vacuum to ON POOL pool floor. and out of pool. clean bottom of pool. BOTTOM SURFACE • Leaves, insects • Pool too close to • Use Intex pool skimmer. DEBRIS etc. -
Page 34: General Aquatic Safety
(261PO) Sand Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014 English GENERAL AQUATIC SAFETY Water recreation is both fun and therapeutic. However, it involves inherent risks of injury and death. To reduce your risk of injury, read and follow all product, package and package insert warnings and instructions. -
Page 35: Limited Warranty
English LIMITED WARRANTY Your Sand Filter Pump & Saltwater system has been manufactured using the highest quality materials and workmanship. All Intex products have been inspected and found free of defects prior to leaving the factory. This Limited Warranty applies only to the Sand Filter Pump & Saltwater system and accessories listed below. The provisions of this Limited Warranty apply only to the original purchaser and is not transferable.
Need help?
Do you have a question about the ECO 20110 and is the answer not in the manual?
Questions and answers
Is there a way to replace pump shaft seal for leaking pump or is there no access to seal. Thanks ECO20110-2
The documents do not provide specific instructions for replacing the shaft seal on the Intex ECO 20110 pump. Therefore, the method to replace the pump shaft seal cannot be determined from the provided information.
This answer is automatically generated