Servo System Check; Rf Switching Position Adjustment (Ma-336 Board); Audio System Adjustment; Hi-Fi Audio System Adjustment (Hi-Fi Model Only) - Sony SLV-GA30 Service Manual

QQ
3 7 63 1515 0
2-3.

SERVO SYSTEM CHECK

2-3-1. RF Switching Position Adjustment
(MA-336 Board)
[Adjustment Purpose]
To adjust the link of the A-ch and B-ch of the tape playback outputs.
To make the unit compatible with other tapes and units. If this
specification is not satisfied, the link will appear on the screen and
the screen will be disrupted, etc.
Mode
Signal
Measurement point
Measuring instrument
Adjusting element
Specified value
[Adjustment Method]
1) Playback the alignment tape.
Short-circuit between pins 1 and 2 of CN210.
2)
3) Check that "RF" is indicated on FL display.
4) Check that switching position is 6.5 ± 1 H.
5) If not meet the specified value, turn RV202 and repeat steps 1)
to 3).
TE
L 13942296513
CH1
CH2
CH1
CH2
CN202 pin 3
www
.
http://www.xiaoyu163.com
Playback
Alignment tape: SP color bar portion
CH1: Video LINE OUT
(75 Ω terminated)
(AF switching position)
CH2: CN101 pin 3 (V SWP)
Oscilloscope
RV202
6.5 ± 1 H (413 ± 60 µσεχ): ΝΤΣΧ
6.5 ± 1 H (416 ± 32 µsec): PAL
V
Enlargement
Vertical sync. signal
6.5 ± 1 H
(413 ± 60 µ sec): NTSC
(416 ± 32 µ sec): PAL
Fig. 6-2-3
x ao
y
i
http://www.xiaoyu163.com
8
2-4.

AUDIO SYSTEM ADJUSTMENT

• Adjust both L ch and R ch.
[Connecting Instruments]
Audio oscillator
2-4-1. Hi-Fi Audio System Adjustment
(Hi-Fi model only)
• Perform the adjustment setting the switch on the following
positions.
• AUDIO MONITOR ..................................................... STEREO
[Adjustment Method]
1. ACE head adjustment.....Refer to the VHS mechanical
adjustment manual
2. E-E output level check
3. "Recording Bias Adjustment"
Q Q
3 6 7 1 3
Approx.
1Vp-p
Approx.
5Vp-p
u163
.
6-3
2 9 9 4 2 8
Audio line OUTPUT L/R
Audio line INPUT L/R
600 Ω
Attenuator
VTR
Fig. 6-2-4
(S MECHANISM)(9-921-647-11).
1 5 0 5 8 2 9 9 4
m
co
9 9
Audio level meter
or distortion meter
47 k Ω
2 8 9 9