Table of Contents
Advertisement
Quick Links
INSTALLATION INSTRUCTIONS FOR PART 95-7899
2001-2005 Honda Civic
(Except 2005 Civic SE)
95-7899
KIT FEATURES
• Double DIN Head Unit Provision
• Stacked ISO DIN Head Unit Provision
KIT COMPONENTS
• A) Double DIN Trim Plate
Phillips Screwdriver • Utility Knife • Socket Wrench
1-800-221-0932
© COPYRIGHT 2004-2008 METRA ELECTRONICS CORPORATION
APPLICATIONS
A
TOOLS REQUIRED:
www.metraonline.com
Advertisement
Table of Contents
Related Manuals for Metra Electronics 95-7899
Summary of Contents for Metra Electronics 95-7899
- Page 1 INSTALLATION INSTRUCTIONS FOR PART 95-7899 APPLICATIONS 2001-2005 Honda Civic (Except 2005 Civic SE) 95-7899 KIT FEATURES • Double DIN Head Unit Provision • Stacked ISO DIN Head Unit Provision KIT COMPONENTS • A) Double DIN Trim Plate TOOLS REQUIRED: Phillips Screwdriver • Utility Knife • Socket Wrench 1-800-221-0932 www.metraonline.com...
-
Page 2: Table Of Contents
95-7899 T ABLE OF CONTENTS Dash Disassembly - 2001-2005 Honda Civic (Except 2005 Civic SE) Center Console Without Armrest ......1 Center Console With Armrest . -
Page 3: Center Console Without Armrest
95-7899 DASH DISASSEMBL Y 2001-2005 HONDA CIVIC (EXCEPT 2005 CIVIC SE) CENTER CONSOLE WITHOUT ARMREST Disconnect the negative battery terminal to prevent an accidental short circuit. Unclip the parking brake trim panel and remove (2) Phillips screws exposed. (Figure A) -
Page 4: Center Console With Armrest
95-7899 DASH DISASSEMBL Y 2001-2005 HONDA CIVIC (EXCEPT 2005 CIVIC SE) CENTER CONSOLE WITH ARMREST Disconnect the negative battery terminal to prevent an accidental short circuit. Automatic transmission: a. Apply parking brake and place shifter in neutral position. b. Unclip and remove trimring around shifter. -
Page 5: Double Din Head Unit Provision
95-7899 KIT ASSEMBL Y DOUBLE DIN HEAD UNIT PROVISION Remove the center bar from DDIN Trimplate. (Figure A) Snap the DDIN Trimplate into the bracket and unit assembly. (Figure B) Attach the aftermarket radio to the factory brackets by aligning the... -
Page 6: Stacked Iso Head Unit Provision
95-7899 KIT ASSEMBL Y STACKED ISO HEAD UNIT PROVISION Depending on the type of aftermar- ket head units being installed (ie: Flip down, removable and motorized faced head units) the center bar may have to be removed and a small por-... -
Page 7: Final Assembly
95-7899 FINAL ASSEMBL Y FINAL ASSEMBL Y Strip wire ends back 1/2" Twist ends together Solder Tape 1 Locate the factory wiring harness in the dash and make the connection as shown. Metra recomends using the proper mating adapter and making the connections as shown. - Page 8 95-7899 INSTRUCTIONS 1-800-221-0932 www.metraonline.com REV. 04/15/08 © COPYRIGHT 2004-2008 METRA ELECTRONICS CORPORATION INST95-7899...
Need help?
Do you have a question about the 95-7899 and is the answer not in the manual?
Questions and answers