Samsung HT-J7500W User Manual page 17

Tv Aspect Ratio
Lets you adjust the output of the product to
the screen size of your TV. (See page 51)
Bd Wise
Bd Wise is Samsung's latest inter-connectivity
feature. When you connect a Samsung product
and a Samsung TV with Bd Wise to each
other via HDMI, and Bd Wise is on in both the
product and TV, the product outputs video at
the video resolution and frame rate of the Blu-
ray/DVD Disc.
Resolution
Lets you set the output resolution of the HDMI
video signal to Bd Wise, Auto, 1080p, 1080i,
720p, 576p/480p. The number indicates the
number of lines of video per frame. The i and
p indicate interlaced and progressive scan,
respectively.
The more lines, the higher quality.
Movie Frame (24 fps)
Setting the Movie Frame (24 fps) feature to
Auto lets the product adjust its HDMI output
to 24 frames per second automatically for
improved picture quality if attached to a 24 fps
compatible TV.
You can enjoy the Movie Frame (24 fps)
●
feature only on a TV supporting this frame
rate.
Movie Frame is only available when the
●
product is in the HDMI 1080p output
resolution modes.
dvd 24 fps Conversion
Converts DVD playback to 24 frames per
second and outputs it via HDMI. This option is
only available when Movie Frame (24 fps) is set
to Auto.
This feature applies to NTSC discs only.
✎
Fit Screen Size
Lets you select the optimal size for the Smart
Hub or Screen Mirroring Screen.
HdMI Colour Format
Lets you set the colour space format for the
HDMI output to match the capabilities of the
connected device (TV, monitor, etc).
HdMI deep Colour
Lets you set the product to output video
from the HDMI OUT jack with Deep Colour.
Deep Colour provides more accurate colour
reproduction with greater colour depth.
progressive Mode
Lets you improve picture quality when viewing
DVDs.
Simple Speaker Setup (HT-J7500W only)
Lets you configure the settings of the speakers
you have connected to obtain the best possible
surround sound.
 Normal Mode : Select if you have set up your
speakers in the recommended speaker layout
with the surround speakers next to or behind
the listening positions.
 Simple Mode : Select if you have put your
surround speakers in front of the listening
position. Downmixes the front sound to the
surround sound speakers.
SFE, Virtual 7.1 will not operate when the
✎
Simple Mode is on.
Speaker Settings
 Sound Output : Lets you select which speakers
are active, either the TV's speakers or the home
cinema's speakers.
 Settings (Home theatre speakers) : Lets you
adjust the following speaker settings and turn
the test tone on and off so you can test the
speakers.
- volume Level : Lets you adjust the relative
loudness of each speaker from 6dB to
-6dB. For example, if you like deep bass,
you can increase the loudness of the
subwoofer by 6dB.
- distance : Lets you adjust the relative
distance of each speaker from the listening
position up to 9 meters. The farther the
distance, the louder the speaker will be.
- Speaker Test : Begins a test to set the best
surround sound configuration. Press Stop
Test to stop the test while it is in progress.
17
- English
Sound