Sim Card - Webasto ThermoCall TC4 Installation Instructions Manual

SIM card

A SIM card not included in the
delivery scope is required to operate
the unit.
Both 1.8 V and 3 V SIM cards of a
network operator, which supports
the GSM 900/1800 mobile
communications standard, can be
used.
Always observe any information of
the respective network operator
when operating the SIM card. No
warranty can be given for the SIM
card used. The function should be
checked separately in individual
cases.
Before inserting the SIM card, the
PIN code must be changed to 1234
with a mobile phone. Information on
this topic is contained in the
respective operating instructions of
the mobile phone.
All data which may be present on
the SIM card will be deleted when
commissioning the GSM module.
The SIM card is inserted under the
sliding cover on the top of the GSM
module with the angled side
opposite the hinge and with the chip
side facing downward.
Only insert or remove the SIM card in
the deenergised state.
The range is dependent on the
respective network operator. Costs
result from the operation of a SIM
card. Information on this topic and
on roaming charges abroad and in
areas close to the border (due to
network overlapping) can be
obtained from the respective
network operator. No liability can be
accepted for any costs arising.
ThermoCall TC4
3