Further Setting For The Wireless System (Subwoofer) - Sony HT-ST9 Operating Instructions Manual

Note
Be sure to check that the remote control of the TV cannot control the TV,
and then set [IR-Repeater] to [On] (page 25). If it is set to [On] when the
remote control can control the TV, appropriate operation may not be
obtained because of the interference between the direct command from
the remote control and the command via the system.
1
Press HOME.
The home menu appears on the TV screen.
2
Select [Setup] - [System Settings] from the home
menu.
3
Select [IR-Repeater].
4
Select [On].
5
Press HOME.
The menu goes off.
Note
On some TVs, this function may not work correctly. In this case, place the
Bar Speaker slightly further away from the TV.
Further Setting for the Wireless System
(Subwoofer)
On/standby indicator
1
Press HOME.
The home menu appears on the TV screen.
2
Select [Setup] - [System Settings] from the home
menu.
3
Select [Wireless Sound Connection].
The [Wireless Sound Connection] display appears.
• [Secure Link]
• [RF Band]
SECURE LINK
continued
35
US