•
Vibrate on connection to network: When enabled, your phone will vibrate when a call
connects to the network.
•
Call-end vibration: When enabled, the phone vibrates when the other caller ends the
call.
•
Call connect tone: When enabled, the phone plays a tone when the other caller answers
a call.
•
Minute minder: When enabled, a tone plays once per minute during a call.
•
Call end tone: When enabled, the device plays a tone when the other caller ends the
call.
•
Alerts on call: When enabled, notifications for alarms and new messages play during
calls. When disabled, these notifications will be muted during a call.
Ringtones and keypad tones:
•
Ringtones: Select a ringtone for incoming calls. Tap OK to save your selection.
•
Vibrations: Select a vibration pattern to play for incoming calls when the Vibrate when
ringing option is enabled. You can tap Create to create a custom pattern. Tap OK to save
the settings.
•
Vibrate when ringing: Play a vibration for incoming calls. The vibration pattern is set at
the Vibrations setting.
•
Dialing keypad tone: Enable or disable tones for keypad taps.
Personalize call sound:
•
Adapt sound: Tap Start, and then follow the onscreen prompts to find the best sound for
you.
•
Soft sound: Use softer sounds during calls.
•
Clear sound: Use clearer sounds during calls.
•
Off: Use the default call sound settings.
Noise reduction: When enabled, your phone uses noise reduction to minimize background
noise during calls.
Increase volume in pocket: When enabled, this setting uses the proximity sensor to detect
when the device is in a pocket or other close-fitting location such as a purse or bag, and
increases the volume for incoming call ringtones.
Message Sound Settings
Configure sounds your phone uses for messaging.
1. Press
and tap
Settings
> Settings > My Device.
152