Table of Contents
Advertisement
Connection and setting
When using LAN, after finishing the "Connection/Setting" in this chapter, refer to the "LAN Connection/Setting" (page 16).
Preparation
In order to use the Media Player to display the program on the Display, the enclosed authoring software, a computer, and a USB memory
(if the program is distributed using USB memory ) are required.
Authoring software
The authoring software is on the enclosed CD-ROM. Install the authoring software on your computer when using it for the first time. Refer to the
authoring software User's Manual for the installation procedure.
USB memory
Encoded USB memory cannot be used.
Connection when using USB memory to distribute programs
1.
Remove the screw from the mounting hole for the memory card cover.
2.
Insert the attached memory card into the memory card connector.
CAUTION:
Insert the memory card with the label side down. Check to make Sure that the write protect switch in riot in the look position.
3.
Attach the memory card cover with the screw that was removed from the main body.
4.
Insert a USB cable extension into the USB connector.
(When the program is distributed using a USB memory )
8
Advertisement
Table of Contents
