ZyXEL Communications ARMOR X1 User Manual page 11

The following table describes the LED status.
Table 1 WAP6806 LED Status
FUNCTION STATUS
Power On (Green) The WAP6806 is receiving power and functioning properly.
Blinking
(Green)
Off
Connection
Status
System Blinking
(Red)
Blinking
(all colors)
WPS Blinking
(Amber)
The following table describes the LED combination status of 2.4G and 5G for dual uplink in repeater
mode.
LED Combination Status of 2.4G and 5G
Table 2
COMBINATION BAND
1 2.4G
5G
2 2.4G
5G
3 2.4G
5G
4 2.4G
5G
5 2.4G
5G
6 2.4G
5G
7 2.4G
5G
8 2.4G
5G
9 2.4G
5G
Chapter 1 Introduction
DESCRIPTION
The WAP6806 is booting.
The WAP6806 is not receiving power.
The device uses the LED to generate the following three signal colors:
• Red: signifies a signal strength under 50%
• Orange: signifies a signal strength under 75%
• Green: signifies a signal strength over 75%
The WAP6806 has an error.
The WAP6806 is resetting to the factory default or upgrading the firmware.
The WAP6806's WPS function is in progress.
EXCELLENT GOOD
(100% ~ 70%) (69% ~ 51%)
Green
Green
Green
Amber
Amber
Green
Green
Amber
Amber
Amber
Amber
Green
WAP6806 User's Guide
11
POOR
RESULT
(50% ~ 0%)
Green
Green
Green
Amber
Red
Amber
Amber
Red
Red Amber
Red Amber
Red Red
Red