Related Manuals for BURG-WACHTER TSE 5011
Summary of Contents for BURG-WACHTER TSE 5011
- Page 1 Electronic door lock BUSINESS SET 5011 PINCODE SET 5012 FINGERSCAN SET 5013 E-KEY Assembly BURG-WÄCHTER KG and User Manual Altenhofer Weg 15 58300 Wetter Germany BA / MA TSE Set 5000 dp / fsc 11 / 2015 www.burg.biz...
-
Page 2: Function Button
Thank you very much for your decision for the TSE Series 5000 electronic On button locking system by BURG-WACHTER. This system has been developed Activation of the keypad for entry of an opening code. and manufactured using the latest technical potential and satisfies high Enter button security requirements. -
Page 3: Technical Data
TSE Set 5011 PINCODE Technical data Additional functions available using the optional TSE Software, for example: The electronic cylinder operates using a 6-digit numeric code. Blocking times After 3 × wrong code is entered 1 minute, – User administration Optionally, the TSE 5103 E-KEY remote key can as well be used. then always 3 minutes –... - Page 4 TSE Set 5012 FINGERSCAN Technical data Additional functions available using the optional TSE Software, for example: The electronic cylinder operates using a fingerscan. In addition, the Blocking times After 3 × wrong code is entered 1 minute, – User administration cylinder can be operated by entering the 6-digit numeric code, or also then always 3 minutes –...
- Page 5 TSE Set 5013 E-KEY Additional functions available using the optional TSE Software, Administrator code for example: The code is delivered separately on a sticker. It shall be carefully preserved. The electronic cylinder operates using the E-KEY remote key. The principle –...
-
Page 6: Description Of Menu Functions
– Activate the keypad using the for programming The functions for the products TSE 5011 and TSE 5012 are described below. – Then press FUNC, the “Code Change” menu is displayed – Scroll till reaching the user or the identification medium (E-KEY) –... - Page 7 TSE E-KEY user instructions • Priority Setting the power saving mode In case the door cannot be opened after several attempts with the E-KEY, the – Activate the keypad using the The E-KEY is intended as radio transmitter for releasing the cylinder. The priority of the door can be increased by this function.
-
Page 8: Keypad Installation
E-KEY battery replacement Battery replacement for the keypad When gluing the holder plate on the colour sight protection film, the above described conditions relating to cleanliness of surfaces and firmness of the 1 Open the housing cover by carefully forcing open the detent lugs. –... -
Page 9: Cleaning Instruction
Cleaning instruction Attention: Never pull the inner knob completely from the shaft, as this might cause damage to the electronics! The surface finish of the keypad prevents adherence of impurities. Dust or dirt can be removed from the surfaces using a damp cloth. Schematic illustration of Inner knob setup of the inner knob... - Page 10 Replacement of batteries – knob (inner side) Emergency key function (outer side) 6 Before you fix the outer knob, please consider whether you wish to use the attached cover panel for the profile cylinder section. If so, remove 1 Using the attached hex key, loose the top locking screw on the cylinder Using the mechanical emergency key, you can provide access in case of the protective sheet and fix the cover panel onto the lock section.
Need help?
Do you have a question about the TSE 5011 and is the answer not in the manual?
Questions and answers