Cleaning; Troubleshooting; Service Information; Conditions Of Guarantee - Lincat Silverlink 600 User, Installation And Servicing Instructions

CLEANING

To clean the unit after use, allow the water to cool to a temperature below 55
container. Raise the element from the tank following the instructions in section 1. After cleaning, lower the
element, replace the surround and cooking grids and refill the tank.

TROUBLESHOOTING

If the green neon is illuminated but the elements do not heat up, the high temperature cut-out may require
resetting. This is located on the back panel of the unit and is reset by pressing the exposed button.
Note ECG9/WT resets are located on the control panel.

SERVICE INFORMATION

Catering equipment should be routinely serviced to ensure a long and trouble free life. With this in mind, it
is recommended that appliances are serviced every six months by a competent engineer.
For help regarding the installation, maintenance and use of your Lincat equipment, please call:-
AUTHORISED SERVICE AGENTS
We recommend that all servicing, other than routine cleaning, is carried out by our authorised service
agents and will accept no responsibility for work carried out by other persons. Note that for safe and
efficient operation, appliances need regular servicing.
Please quote both the model and serial numbers from the data plate attached to the unit. Give brief details
of the service requirement.
Lincat reserve the right to carry out any work under warranty during normal working hours, i.e. Monday to
Friday, 8.30 a.m. - 5.00 p.m.

CONDITIONS OF GUARANTEE

The guarantee does not cover: -
1. Accidental breakage or damage
2. Operational misuse, wear and tear from normal usage, incorrect adjustment and neglect.
3. Incorrect installation, maintenance, modification or unauthorised service work.
IS401 – ECN3553
LINCAT SERVICE HELP DESK
01522 875520
o
C and drain it into a suitable
4