Wireless Mode Screen - Sharp PN-L603W Operation Manual

In the home screen that appears on the monitor in Wireless mode, you can select computers to be connected and set various
functions.
1
1. Shows how to connect to the wireless controller.
2. Shows the IP address of the wireless controller.
3. Shows the SSID (Host Name) of the wireless controller.
4. Shows the passcode.
5. Show a list of the connected computers.
6. You can change the language used in the wireless controller screen.
You can enable starting of the connection software from a commercially available USB flash drive. (See page 30.)
7. Specify whether or not a screen is displayed on the monitor by computer operation. The selection changes each time you
touch this.
: Prohibit screen display by operation from another computer
: Allow screen display by operation from another computer
8. You can display the screens of up to 4 computers at once.
14
E

Wireless mode screen

3 2
4
5
6
7
8